Search results
Results from the WOW.Com Content Network
A driving band or rotating band is a band of soft metal near the base of an artillery shell, often made of gilding metal, [1] copper, or lead. When the shell is fired, the pressure of the propellant swages the metal into the rifling of the barrel and forms a seal; this seal prevents the gases from blowing past the shell and engages the barrel's ...
The United States Navy typically specified a bourrelet diameter 0.015 in (0.38 mm) smaller than nominal land diameter with a minus manufacturing tolerance so the average clearance was about 0.012 in (0.30 mm) to compensate for thermal expansion firing a projectile from a warm magazine through a cold barrel and to clear copper fouling from the ...
The Model 1795, a very elongated musket, retained many of the characteristics of the Charleville on which it was based. It had a 44 inches (110 cm) long .69 caliber barrel, a 56 inches (140 cm) stock, and a total length of 60 inches (150 cm). The original version had the bayonet lug on the bottom of the barrel but this was later moved to the ...
They are 16 inches in diameter and the barrel is 800 inches long (16 × 50 = 800). This is also sometimes indicated using the prefix L/; so for example, the most common gun for the Panzer V tank is described as a "75 mm L/70," meaning a barrel with an internal bore of 75 mm (3.0 in), and 5,250 mm (17 ft 3 in) long.
For example, factory and aftermarket receivers using the Remington 700 footprint are produced with various types of action threads, all with a 26.99 mm (1 + 1 ⁄ 16 in) diameter, but with a pitch of either a 1.588 mm (16 TPI, Remington standard), 1.411 mm (18 TPI) or 1.270 mm (20 TPI, Savage standard).
57 mm 2.244 inch Ordnance BL 10-pounder Mountain gun: Mountain gun 69.8 mm 2.75 inch 12-pounder (multiple types) Light field gun 76.2 mm 3 inch Ordnance QF 13-pounder: Light field gun 76.2 mm 3 inch 15- pounder (multiple types) Field gun 76.2 mm 3 inch Ordnance QF 17- pounder: Anti-tank gun 76.2 mm 3 inch Ordnance QF 18- pounder: Field gun 83.8 mm
A front sight cast into the upper barrel band, rear sight (percussion/rifled conversion) Springfield Model 1822 percussion lock conversion The Springfield Model 1822 was a .69 caliber flintlock musket manufactured by the United States in the early 19th century.
It also had a single barrel band at the center of the barrel, and four iron pipes that held a wooden scouring stick. All of the furniture was iron. The Model 1717 had a 46-inch (1,200 mm) barrel and an overall length of 62 inches (1,600 mm), and weighed approximately nine pounds. A total of 48,000 Model 1717 muskets were produced.