Search results
Results from the WOW.Com Content Network
The W-series engine was made of cast iron. The engine block had 4.84-inch (123 mm) bore centers, two-bolt main bearing caps, a "side oiling" lubrication system (the main oil gallery located low on the driver's side of the crankcase), with full-flow oil filter, and interchangeable cylinder heads. Heads used on the high performance 409 and 427 ...
Motorcraft also sells motor oil for automotive use. As of the late 2000s, most of their oil is a synthetic blend or fully synthetic. Several weights are available, from 0W-20 all the way to 15W-40 for diesel engines.
Unlike earlier diesel engines the B-series Cummins used direct injection and did not need glow plugs for cold starting. [2] The engine was first manufactured in Rocky Mount, North Carolina, and other plants were later added in Mexico, Brazil, Turkey, and Darlington, UK. [3] It uses a gear-drive camshaft for extra reliability. Also specified is ...
Motor oil, engine oil, or engine lubricant is any one of various substances used for the lubrication of internal combustion engines. They typically consist of base oils enhanced with various additives, particularly antiwear additives , detergents, dispersants , and, for multi-grade oils, viscosity index improvers .
The 430 was replaced by the 462 cu in (7.6 L; 7,565 cc) engine in 1966. Bore and stroke were entirely different at 4.38 and 3.83 inches (111.3 and 97.3 mm) and the 462 MEL engine produced 340 hp (254 kW) and as much as 485 lb⋅ft (658 N⋅m) of torque. This engine was fitted with hydraulic lifters and a four-barrel Carter AFB carburetor.
B-series 1500 engine in a Nash Metropolitan Series 3. The 1.5 L (1,489 cc) version was first used in 1953 in the MG Magnette ZA in twin carburettor version and in 1954 in the Morris Oxford Series II and Austin Cambridge. [8] In 1957, it was used in the original MGA. Output in twin carburettor form was 68–72 bhp (51–54 kW) and 55 bhp (41 kW ...
Each engine has a single-overhead-cam and four valves per cylinder. The 77-degree cylinder angle minimizes vibration. [1] Both are dry sump, with a separate oil tank for the gearbox and engine. The 450 produces a claimed 60 horsepower (45 kW) at the crank, while the 550 produces a claimed 70. [1] [2]
The medium-duty F-Series was marketed as a 1½ ton F-5 and 2 ton F-6, in both conventional and cab-over engine (COE) configurations. The F-5 and F-6 also served as the basis for the B-Series bus chassis; produced primarily for school bus use, the B-series was a bare chassis aft of the firewall.