Search results
Results from the WOW.Com Content Network
A natural-gas processing plant in Aderklaa, Austria. Natural-gas processing is a range of industrial processes designed to purify raw natural gas by removing contaminants such as solids, water, carbon dioxide (CO 2), hydrogen sulfide (H 2 S), mercury and higher molecular mass hydrocarbons to produce pipeline quality dry natural gas [1] for pipeline distribution and final use. [2]
Compressed natural gas (CNG) is a fuel gas mainly composed of methane (CH 4), compressed to less than 1% of the volume it occupies at standard atmospheric pressure.It is stored and distributed in hard containers at a pressure of 20–25 megapascals (2,900–3,600 psi; 200–250 bar), usually in cylindrical or spherical shapes.
The heating value depends on the source of gas that is used and the process that is used to liquefy the gas. The range of heating value can span ±10 to 15 percent. A typical value of the higher heating value of LNG is approximately 50 MJ/kg or 21,500 BTU/lb. [2] A typical value of the lower heating value of LNG is 45 MJ/kg or 19,350 BTU/lb.
Sour gas is natural gas or any other gas containing significant amounts of hydrogen sulfide (H 2 S). Natural gas is usually considered sour if there are more than 5.7 milligrams of H 2 S per cubic meter of natural gas, which is equivalent to approximately 4 ppm by volume under standard temperature and pressure.
Darby Generating Station is a 480 megawatt , natural gas peaker plant located in Darby Township, Pickaway County near Mount Sterling, Ohio. The plant is currently owned by Lightstone Generation LLC, a 50-50 joint venture of The Blackstone Group and ArcLight Capital Partners. The plant has six units and began operations in 2001.
At least 60 Lake Norman neighbors have emailed state regulators urging them to reject Duke Energy’s plans for two natural gas turbines off their curvy, tree-draped, two-lane Catawba County road.
Maximum Allowable Operating Pressure (MAOP) is a pressure limit set, usually by a government body, which applies to compressed gas pressure vessels, pipelines, and storage tanks. For pipelines, this value is derived from Barlow's Formula , which takes into account wall thickness, diameter, allowable stress (which is a function of the material ...
Natural gas companies in Europe, Australia, and South America have adopted 15 °C (59 °F) and 101.325 kPa (14.696 psi) as their standard gas volume reference conditions, used as the base values for defining the standard cubic meter.