Search results
Results from the WOW.Com Content Network
A unit injector (UI) is a high-pressure integrated direct fuel injection system for diesel engines, combining the injector nozzle and the injection pump in a single component. The plunger pump used is usually driven by a shared camshaft. In a unit injector, the device is typically lubricated and cooled by the fuel itself.
An electronically controlled unit injector (EUI) sometimes referred to as a mechanical electronic unit injector (MEUI) is a unit injector (UI) with electronic control. It performs the same function as a conventional unit injector in an internal combustion engine , such as in an on-road or off-road vehicle or a diesel-electric locomotive .
The 1994.5 to 1996/97 DI Power Stroke has "single shot" HEUI (hydraulically actuated electronic unit injection) fuel injectors which were AA code injectors unless from California where as they received AB code injectors. It ran a high pressure oil pump (HPOP) to create the necessary oil pressure to fire the fuel injectors.
Common rail fuel system on a Volvo truck engine. In 1916 Vickers pioneered the use of mechanical common rail systems in G-class submarine engines. For every 90° of rotation, four plunger pumps allowed a constant injection pressure of 3,000 pounds per square inch (210 bar; 21 MPa), with fuel delivery to individual cylinders being shut off by valves in the injector lines. [1]
In a manifold injection system, air and fuel are mixed outside the combustion chamber so that a mixture of air and fuel is sucked into the engine. The main types of manifold injections systems are multi-point injection and single-point injection. These systems use either a continuous injection or an intermittent injection design. [16]
It is a typical application of the injector principle used to deliver cold water to a boiler against its own pressure, using its own live or exhaust steam, replacing any mechanical pump. When first developed, its operation was intriguing because it seemed paradoxical, almost like perpetual motion, but it was later explained using thermodynamics ...
The injection system was purely mechanical, using a timed pumping cylinder and a non-return valve. On its downward stroke it compresses the rich mixture to about 70 psi at which time the rising pressure raises a spring loaded poppet valve off its seat and the charge is squirted into the cylinder.
The pintle injector is a type of propellant injector for a bipropellant rocket engine. Like any other injector, its purpose is to ensure appropriate flow rate and intermixing of the propellants as they are forcibly injected under high pressure into the combustion chamber , so that an efficient and controlled combustion process can happen.