Search results
Results from the WOW.Com Content Network
/ = the fore of the rear axles is steered (pusher axle) * = the rearmost of the rear axles is steered (tag axle) C = number of steered wheels - = separates axle groups and/or different axle functions (6x4-2 is 6x6 with undriven rear axle) Basis is always the standard configuration, meaning a steered front axle and a non-steered driven rear axle.
TTI HS-20 allowed shorter trucks to have higher weight limits than Formula B. For a 3-axle truck with an axle length of 14 feet (4.3 m), the weight limit increased from 46,500 pounds (21,100 kg) to 54,000 pounds (24,000 kg). [29] TTI HS-20 also failed to address the problem of multiple-span bridges. [28]
Dana 61 axle tag showing 3.73:1 ratio [1] The Dana 61 was made in semi-float and full-float axles for select 4×2 and 4x4 Ford 3 ⁄ 4-ton and 1 Ton Pickups and Vans from 1974 to 1987. A Dana 61 front axle was selectively used in Dodge 4×4 3 ⁄ 4-ton and 1 Ton pickups from 1987 to 1993. Although 3.07:1 and 3.31:1 gear sets are common for a ...
The Dana 70 axle only came with 5.13:1, 4.88,5.31 [citation needed] gear ratios and had a GAWR of [citation needed] these axles were rated at 7-9klbs as seen on 5500 door stickers. They differ greatly from previous Dana 70 front axles, some of the major differences being the use of 1550 Universal Joints and being a high pinion, reverse cut axle.
For model year 2000 - 2004 trucks, the F-150 7700 offered this axle and the F-250 light duty was discontinued. At least till 2011 the 12 bolt semi float was still found with the heavy duty f-150. Gear ratios were 3.73 in 4x4 and either the 3.73 or 4.10 in the two-wheel-drive models.
The Ram 3500 has three axle ratios (3.42, 3.73, and 4.10) and 17" wheels. Ram 4500/5500 has three axle ratios (4.10, 4.44, and 4.88) and 19.5-inch wheels. The 4500/5500 Rams rear axle is a Dana S 110. The front axle on 4×4 models is manufactured by Magna, while 2-wheel-drive models just have a solid, non-drive axle.
It could shift between low and high ranges while moving. In the low range the front axle is automatically engaged, in the high range the driver controls it. [11] The M809 series used Rockwell-Standard double-reduction axles with a 6.44:1 ratio. New production M939A2 use a similar Meritor model, also with a 6.44:1 ratio. Steering boxes and some ...
Trac Loks were a US$350.00 option with Ford Super Duty trucks. [1] The Dana 80 Trac Lok is unique being it is a 4 pinion unit, unlike other Dana Trac Lok units with 2 pinions. This was the only rear axle available for the 2nd generation Dodge Ram 3500 trucks. [2] 35 Spline Dana 80 in a 2002 Dodge 2500HD Diesel