enow.com Web Search

Search results

1. Results from the WOW.Com Content Network

2. Low-flush toilet - Wikipedia

   en.wikipedia.org/wiki/Low-flush_toilet

   A low-flush toilet (or low-flow toilet or high-efficiency toilet) is a flush toilet that uses significantly less water than traditional high-flow toilets. Before the early 1990s in the United States, standard flush toilets typically required at least 3.5 gallons (13.2 litres) per flush and they used float valves that often leaked, increasing their total water use.

3. Dual flush toilet - Wikipedia

   en.wikipedia.org/wiki/Dual_flush_toilet

   Based on the WaterSense averaging rule over two reduced flushes and one full flush, a dual-flush toilet with a full flush at the US legal maximum of 1.6 US gallons (6.1 L) must have a reduced flush of 1.12 US gallons (4.2 L) or less to meet the WaterSense standard of 1.28 US gallons (4.8 L) on average. [17]

4. Low-flow fixtures - Wikipedia

   en.wikipedia.org/wiki/Low-flow_fixtures

   In the United States, Older conventional toilet models, typically those built before 1982, can use 5 to 7 gallons of water per flush. Toilets from the era of 1982-1993 may use a somewhat smaller 3.5 gpf. Modern washdown and symphonic variant standard flush toilets in the United States use 1.6 gpf or 6 lpf (liters per flush). [10]

5. Flush toilet - Wikipedia

   en.wikipedia.org/wiki/Flush_toilet

   If the toilet is flushed from a tank, a large holding cistern is mounted above the toilet, containing approximately 4.5 to 6 L (1.2 to 1.6 US gallons) of water in modern designs. This tank is built with a large drain 50 to 75 mm (2 to 3 inches) diameter hole at its bottom covered by a flapper valve that allows the water to rapidly leave the ...

6. Residential water use in the U.S. and Canada - Wikipedia

   en.wikipedia.org/wiki/Residential_water_use_in...

   Future reduction in toilet end use will occur as more homes use low-flush toilets (1.6 gpf, or 6 lpf) mandated by the 1992 Energy Policy Act, or high efficiency toilets (1.28 gpf or 4.85 lpf) which meet the EPA WaterSense specifications. A recent study shows that about 21 percent of all toilets in 5 states (Arizona, California, Colorado ...

7. Comparison of the imperial and US customary measurement ...

   en.wikipedia.org/wiki/Comparison_of_the_imperial...

   American brewers package their beer in 12-US-fluid-ounce bottles, which are 355 mL each. As a result, Canadian bottles are labelled as 11.5 fl oz in US units when imported into the United States. Because the standard size of Canadian beer bottles predates the adoption of the metric system in Canada, the bottles are still sold and labelled in ...