Search results
Results from the WOW.Com Content Network
The simplest system bus has completely separate input data lines, output data lines, and address lines. To reduce cost, most microcomputers have a bidirectional data bus, re-using the same wires for input and output at different times. [20] Some processors use a dedicated wire for each bit of the address bus, data bus, and the control bus.
To prevent bus contention on the data bus, at any one instant only one device drives the data bus. In very simple systems, only the data bus is required to be a bidirectional bus. In very simple systems, the memory address register always drives the address bus, the control unit always drives the control bus, and an address decoder selects ...
In computing, an input–output memory management unit (IOMMU) is a memory management unit (MMU) connecting a direct-memory-access–capable (DMA-capable) I/O bus to the main memory. Like a traditional MMU, which translates CPU -visible virtual addresses to physical addresses , the IOMMU maps device-visible virtual addresses (also called device ...
The most common version, called DDC2B, is based on I²C, a serial bus. Pin 12, ID1, of the VGA connector is used as the data pin of the I²C bus, and the formerly-unused pin 15 is the I²C clock. Pin 9, previously used as a mechanical key, supplies +5V DC power (up to 50mA) to power the EEPROM.
Each device can request up to six areas of memory space or input/output (I/O) port space via its configuration space registers. In a typical system, the firmware (or operating system ) queries all PCI buses at startup time (via PCI Configuration Space ) to find out what devices are present and what system resources (memory space, I/O space ...
Devices for communication between computers, such as modems and network cards, typically perform both input and output operations. Any interaction with the system by an interactor is an input and the reaction the system responds is called the output. The designation of a device as either input or output depends on perspective.
In a bus mastering system, also known as a first-party DMA system, the CPU and peripherals can each be granted control of the memory bus. Where a peripheral can become a bus master, it can directly write to system memory without the involvement of the CPU, providing memory address and control signals as required.
Any data input device that reads data from a card-shaped storage medium such as a memory card. [1] [2] [3] channel I/O A generic term that refers to a high-performance input/output (I/O) architecture that is implemented in various forms on a number of computer architectures, especially on mainframe computers. chipset. Also chip set.