Search results
Results from the WOW.Com Content Network
This critical object distance "h" is known as the Hyperfocal Distance. For a camera focused on this distance, D 1 = ∞ and D 2 = h/2, and we see that the range of distances acceptably in focus will run from just half the hyperfocal distance to infinity. The hyperfocal distance is, therefore, the most desirable distance on which to pre-set the ...
The depth of field, and thus hyperfocal distance, changes with the focal length as well as the f-stop. This lens is set to the hyperfocal distance for f /32 at a focal length of 100 mm. In optics and photography, hyperfocal distance is a distance from a lens beyond which all objects can be brought into an "acceptable" focus.
The distance between the lenses in a typical stereo camera (the intra-axial distance) is about the distance between one's eyes (known as the intra-ocular distance) and is about 6.35 cm, though a longer base line (greater inter-camera distance) produces more extreme 3-dimensionality.
The maximum aperture for a zoom lens may be the same (constant) for all focal lengths, but it is more common that the maximum aperture is greater at the wide-angle end than at the telephoto end of the zoom range. For example, a 100 mm to 400 mm lens may have a maximum aperture of f/4.0 at the 100 mm end but will diminish to only f/5.6 at the ...
Depth of field depends on the focus distance, while depth of focus does not. Depth of focus can have two slightly different meanings. The first is the distance over which the image plane can be displaced while a single object plane remains in acceptably sharp focus; [1][2] [clarify] the second is the image-side conjugate of depth of field.
Consider a rectilinear lens in a camera used to photograph an object at a distance , and forming an image that just barely fits in the dimension, , of the frame (the film or image sensor). Treat the lens as if it were a pinhole at distance S 2 {\displaystyle S_{2}} from the image plane (technically, the center of perspective of a rectilinear ...
That distance is sometimes given on the filter in millimeters. A +3 close-up lens has a maximal working distance of 0.333 m or 333 mm. The magnification is the focal distance of the objective lens (f) divided by the focal distance of the close-up lens; i.e., the focal distance of the objective lens (in meters) multiplied by the diopter value (D) of the close-up lens:
Lens speed is the maximum aperture diameter, or minimum f-number, of a photographic lens. A lens with a larger than average maximum aperture (that is, a smaller minimum f-number) is called a "fast lens" because it can achieve the same exposure as an average lens with a faster shutter speed. Conversely, a smaller maximum aperture (larger minimum ...