Search results
Results from the WOW.Com Content Network
A typical turbocharged V8 diesel engine might have an engine power of 250 kW (340 hp) and a mass of 380 kg (840 lb), [1] giving it a power-to-weight ratio of 0.65 kW/kg (0.40 hp/lb). Examples of high power-to-weight ratios can often be found in turbines. This is because of their ability to operate at very high speeds.
Acceleration from 0 to 100 km/h (62 mph) takes 3.4 seconds and the top speed is 323 km/h (201 mph). It has the same 7-speed Lamborghini Doppia Frizione (LDF) dual-clutch transmission as that of the coupé. The Spyder has a dry weight of 1,542 kg (3,400 lb) which is 120 kg (265 lb) more than the coupé due to chassis reinforcing components.
For example, Concorde cruised at 1354 mph, or 7.15 million feet per hour, with its engines giving an SFC of 1.195 lb/(lbf·h) (see below); this means the engines transferred 5.98 million foot pounds per pound of fuel (17.9 MJ/kg), equivalent to an SFC of 0.50 lb/(lbf·h) for a subsonic aircraft flying at 570 mph, which would be better than even ...
The result is a weight reduction of 60 kg (132 lb) as compared to the McLaren P1 GTR as well as a 40 per cent increase in downforce. [56] The P1 LM also features a larger twin-turbocharged V8 engine than the P1 and P1 GTR at 3,994 cc (4.0 L) with an 8,500 rpm red line.
Type MTOW [kg] MLW [tonnes] TOR [m] LR [m] ICAO category FAA category; Antonov An-225: 640,000: 591.7: 3,500: Super: Super Scaled Composites Model 351 Stratolaunch
It is therefore calculated by the formula [10] = + where is the displacement volume. This is the volume inside the cylinder displaced by the piston from the beginning of the compression stroke to the end of the stroke. is the clearance volume. This is the volume of the space in the cylinder left at the end of the compression stroke.
The tonne (/ t ʌ n / ⓘ or / t ɒ n /; symbol: t) is a unit of mass equal to 1,000 kilograms.It is a non-SI unit accepted for use with SI.It is also referred to as a metric ton in the United States to distinguish it from the non-metric units of the short ton (United States customary units) and the long ton (British imperial units).
This translates to a hoppus foot being equal to 1.273 cubic feet (2,200 in 3; 0.0360 m 3). The hoppus board foot, when milled, yields about one board foot. The volume yielded by the quarter-girth formula is 78.54% of cubic measure (i.e. 1 ft 3 = 0.7854 h ft; 1 h ft = 1.273 ft 3). [45]