Search results
Results from the WOW.Com Content Network
An external floating roof tank is a storage tank commonly used to store large quantities of petroleum products such as crude oil or condensate. It consists of an open- topped cylindrical steel shell equipped with a roof that floats on the surface of the stored liquid. The roof rises and falls with the liquid level in the tank. [1]
Hydrostatic pressure level sensors are submersible or externally mounted pressure sensors suitable for measuring the level of corrosive liquids in deep tanks or water in reservoirs. Typically, fluid level is determined by the pressure at the bottom of the fluid containment (tank or reservoir); the pressure at the bottom, adjusted for the ...
Level instrumentation determines the height of liquids by measuring the position of a gas/liquid or liquid/liquid interface within the vessel or tank. Such interfaces include oil/gas, oil/water, condensate/water, glycol/condensate, etc. Local indication (LI) includes sight glasses which show the liquid level directly through a vertical glass ...
A heated-water bath is probably the most effective method of removing foam bubbles from foaming crude oil. A heated-water bath is not practical in most oil and gas separators, but heat can be added to the oil by direct or indirect fired heaters and/or heat exchangers, or heated free-water knockouts or emulsion treaters can be used to obtain a ...
There are however standards in place for fiscal automatic sampling of crude oil namely API 8.2 and ISO 3171. [1] Water cut meters are typically used in the petroleum industry to measure the water cut of oil flowing from a well, produced oil from a separator, crude oil transfer in pipelines and in loading tankers. There are several technologies ...
All unrefined crude oil has some water entrained within it. During transportation by ship, separation occurs naturally and water collects at the base of the tank below the oil, this is known as free water (FW). [4] Sales contracts for crude oil will typically specify the BS&W and FW to ensure the cargo meets quality standards.
Tracers are used in the oil industry in order to qualitatively or quantitatively gauge how fluid flows through the reservoir, [1] as well as being a useful tool for estimating residual oil saturation. Tracers can be used in either interwell tests or single well tests. [2]
Depending on the pressure used, a cleaning cycle can take from about 10 to 50 minutes and the machine uses between 15 US gallons (56.8 L; 12.5 imp gal) and 350 US gallons (1,324.9 L; 291.4 imp gal) per minute. [1] On most crude-oil tankers, a special crude oil washing system, or COW system, is part of the cleaning process. [5]