Search results
Results from the WOW.Com Content Network
Alternatively, stone cladding can be a natural stone that has been quarried and then cut into thin pieces to reduce weight. Being heavier, natural stone cladding often needs mechanical fixing to be adhered to substrates. Mechanical fixing could be using shelf angles, or perhaps a product called stone clip.
Fire resisting construction discourages the use of combustible materials in cladding to minimize the spread of fire, together with insisting adequate fire barriers are employed within building cavities. The specific fire strategy for the building, will be set out by the fire engineer including the requirements for the façade cladding.
Thin blocks (3 to 4 inches (76 to 102 millimetres)) of stone can be inset within a curtain wall system. The type of stone used is limited only by the strength of the stone and the ability to manufacture it in the proper shape and size. Common stone types used are: calcium silicate, granite, marble, travertine, limestone, and engineered stone ...
Wall framing in house construction includes the vertical and horizontal members of exterior walls and interior partitions, both of bearing walls and non-bearing walls. . These stick members, referred to as studs, wall plates and lintels (sometimes called headers), serve as a nailing base for all covering material and support the upper floor platforms, which provide the lateral strength along a
Design of a cavity between the cladding and the exterior wall of the building (or its sheath of insulation) is also significant: flames can occupy the cavity and be drawn upwards by convection, elongating to create secondary fires, and do so "regardless of the materials used to line the cavities". [24]
Because the masonry veneer is non-structural, it must be tied back to the building structure to prevent movement under wind and earthquake loads. Brick ties are used for this purpose, and may take the form of corrugated metal straps nailed or screwed to the structural framing, or as wire extensions to horizontal joint reinforcement in a fully masonry veneer or cavity wall.
Flexible stone veneer is a veneer with a layer of stone 1 to 5 mm thick. Flexible stone veneers should not be confused with traditional stone veneers. It is used for both interior and exterior and especially where bending to a curved surface is required. Flexible stone veneers are made from various types of slate, schist, or marble.
Rock dash stucco used as an exterior coating on a house on Canada's west coast. The chips of quartz, stone, and colored glass measure approx. 3–6 mm (1/8–1/4"). The basic composition of stucco is lime, water, and sand. [4] The difference in nomenclature between stucco, plaster, and mortar is based more on use than composition.