Search results
Results from the WOW.Com Content Network
The frequency at which a processor (CPU) operates is determined by applying a clock multiplier to the front-side bus (FSB) speed in some cases. For example, a processor running at 3200 MHz might be using a 400 MHz FSB. This means there is an internal clock multiplier setting (also called bus/core ratio) of 8. That is, the CPU is set to run at 8 ...
It is measured in the SI unit of frequency hertz (Hz). The clock rate of the first generation of computers was measured in hertz or kilohertz (kHz), the first personal computers (PCs) to arrive throughout the 1970s and 1980s had clock rates measured in megahertz (MHz), and in the 21st century the speed of modern CPUs is commonly advertised in ...
Some CPUs, such as Athlon 64 and Opteron, handle main memory using a separate and dedicated low-level memory bus.These processors communicate with other devices in the system (including other CPUs) using one or more slightly higher-level HyperTransport links; like the data and address buses in other designs, these links employ the external clock for data transfer timing (typically 800 MHz or 1 ...
For example, for a 1.6 GHz Pentium M, the clock frequency can be stepped down in 200 MHz decrements over the range from 1.6 to 0.6 GHz. At the same time, the voltage requirement decreases from 1.484 to 0.956 V. The result is that the power consumption theoretically goes down by a factor of 6.4.
A CPU cache [71] is a hardware cache used by the central processing unit (CPU) of a computer to reduce the average cost (time or energy) to access data from the main memory. A cache is a smaller, faster memory, closer to a processor core, which stores copies of the data from frequently used main memory locations.
A typical north/southbridge layout (2015) A typical north/southbridge layout (2007) In computing, a northbridge (also host bridge, or memory controller hub) is a microchip that comprises the core logic chipset architecture on motherboards to handle high-performance tasks, especially for older personal computers.
The Low Voltage Series include the MSP430C09x and MSP430L092 parts, capable of running at 0.9 V. These 2 series of low voltage 16-bit microcontrollers have configurations with two 16-bit timers, an 8-bit analog-to-digital (A/D) converter, an 8-bit digital-to-analog (D/A) converter, and up to 11 I/O pins.
If the OS timer and the CPU run on two independent clock crystals the situation is ideal and more or less the same as the previous example. But even if they both use the same clock crystal the process /program that does the clock drift measurement is "disturbed" by many more or less unpredictable events in the CPU such as interrupts and other ...