Search results
Results from the WOW.Com Content Network
Using a ballistic calculator, they determined that a 55-grain bullet would have to be fired at 3,300 ft/s to achieve the 500-yard performance necessary. [8] Robert Hutton (technical editor of Guns and Ammo magazine) started the development of a powder load to reach the 3,300 ft/s goal. He used DuPont IMR4198, IMR3031, and an Olin powder to work ...
A guide to the recoil from the cartridge, and an indicator of bullet penetration potential. The .30-06 Springfield (at 2.064 lbf-s) is considered the upper limit for tolerable recoil for inexperienced rifle shooters. [2] Chg: Propellant charge, in grains; Dia: Bullet diameter, in inches; BC: Ballistic coefficient, G1 model; L: Case length (mm)
.223 Remington.223 Winchester Super Short Magnum.224 Voboril.224 Boz.224 Weatherby Magnum.224 Valkyrie.225 Winchester.297/230 Morris.240 Apex.240 Weatherby Magnum.242 Rimless Nitro Express.243 Winchester.243 Winchester Super Short Magnum.244 H&H Magnum.244 Remington.246 Purdey.303/25.25 Remington.25-45 Sharps.25-21 Stevens.25-25 Stevens
According to Browning, the .223 WSSM offers a 600 ft/s (180 m/s) gain with a 55 gr (3.6 g) bullet over the standard .223 Rem. It also offers a 440 ft/s (130 m/s) gain over the .22-250, a popular varmint round. This comes out to a 600 ft⋅lbf (810 J) gain over a standard .223 Rem, and a 350 ft⋅lbf (470 J) gain over the .22-250. [8]
The VPAM scale as of 2009 runs from 1 to 14, with 1-5 being soft armor, and 6-14 being hard armor. [1] Tested armor must withstand three hits, spaced 120 mm (4.7 inches) apart, of the designated test threat with no more than 25 mm (0.98 inches) of back-face deformation in order to pass.
The Gw Pat 90 round firing a 4.1 g (63 gr) FMJ bullet is optimized for use in 5.56 mm (.223 in) caliber barrels with a 254 mm (1:10 in) twist rate. The Gw Pat 90 was designed for the SIG SG 550 when it came into production in 1987, replacing the SIG SG 510. Previous experience of a change in standard rifle had proved that changing the distance ...
Typical factory-loaded .22-250 Remington can propel a 55 grain (3.56 g) spitzer bullet at 3,680 ft/s (1122 m/s) with 1,654 ft⋅lbf (2,243 J) of energy. [8] Many other loads with lighter bullets are used to achieve velocities of over 4,000 ft/s (1,219 m/s), while still having effective energy for use in hunting small game and medium-sized ...
Soon after the release of the .223 Remington as a commercial cartridge, shooters began experimenting with the cartridge in an attempt to improve its performance. [1] Several of these experimenters necked up the .223 Remington to 6mm as the .243 inches (6.17 mm) caliber bullets provided better external ballistic performance over .224 inches (5. ...