Search results
Results from the WOW.Com Content Network
Satisfactory output of the complete system comprising the audio crossover and the loudspeaker drivers in their enclosure(s) is the design goal. Such a goal is often achieved using non-ideal, asymmetric crossover filter characteristics. [5] Many different crossover types are used in audio, but they generally belong to one of the following classes.
From this point, connections are made to the loudspeaker drivers – usually through audio crossover networks. In bi-wiring, each loudspeaker has two pairs of connectors and two cables are run from the same amplifier output to the speaker cabinet: one for the high frequency or tweeter driver and one for the low-frequency driver (through two ...
The fundamental principle of bass management (also called LFE crossover) in surround sound replay systems is that bass content in the incoming signal, irrespective of channel, should be directed only to loudspeakers capable of reproducing it, whether the latter are the main system loudspeakers or one or more subwoofers.
In professional concert sound system design, subwoofers can be incorporated seamlessly with the main speakers into a stereo or mono full-range system by using an active crossover. The audio engineer typically adjusts the frequency point at which lower frequency sounds are routed to the subwoofer speaker(s), and mid-frequency and higher ...
Bi-amping - An active crossover with two amplifiers.. Bi-amping and tri-amping is the practice of using two or three audio amplifiers respectively to amplify different audio frequency ranges, with the amplified signals being routed to different speaker drivers, such as woofers, subwoofers and tweeters.
"DMS" is the contraction for "domestic monitor system", and is designed to be driven passively in the home setting – it incorporated a crossover within the loudspeaker cabinet. The Isobarik PMS ("professional monitor system") loudspeaker launched in 1977, destined for the professional market is without the internal crossover.
In 1975 Ed Long [1] in cooperation with Ronald J. Wickersham invented the first technique to Time-Align a loudspeaker systems. In 1976 Long presented "A Time-Align Technique for Loudspeakers System Design" [2] at the 54th AES convention demonstrating the use of the Time-Align generator to design improved crossover networks for multi-way loudspeakers systems.
Output falls below the system's resonance frequency (F c), defined as the frequency of peak impedance. In a closed-box loudspeaker, the air inside the box acts as a spring, returning the cone to the zero position in the absence of a signal. A significant increase in the effective volume of a closed-box loudspeaker can be achieved by a filling ...