Search results
Results from the WOW.Com Content Network
Aerolux bulbs consumed about 3-5 watts of power. The bulbs had high yield of light produced versus electricity consumed, generally in the range of 50-60 lumens/watt, compared to 12-18 lumens/watt for a tungsten filament incandescent bulb. [9] [failed verification]
The 5881 is a beam power tube designed by Tung-Sol and introduced in 1950. [129] The 5881 is an improved direct replacement for the 6L6 in any equipment originally using the 6L6 and facilitates new amplifier designs producing greater power output than those using 6L6's.
The most commonly used A-series light bulb type is an A60 bulb [7] (or its inch-based equivalent, the A19 bulb [2] [4]), which is 60 mm (19 ⁄ 8 in or 2 + 3 ⁄ 8 in) wide at its widest point [3] and approximately 110 mm (4 + 3 ⁄ 8 in) in length. [8] Other sizes with a data sheet in IEC 60064 are A50, A55, A67, A68, A71, A75, and A80.
Mogul bi-post (G38) can handle up to 100 amps and is used with searchlights and film & stage lighting fixtures of 1000 watts or larger. Incandescent, halogen and HMI light sources use this design. Medium bi-post (G22) is used with film & stage lighting fixtures between 250 and 1000 watts. Mini bi-post (G4-G6) Common types:
The input stage of a CFL is a rectifier, which presents a non-linear load to the power supply and introduces harmonic distortion on the current drawn from the supply. [ 61 ] [ 62 ] The use of CFLs in homes has no appreciable effect on power quality , but significant quantities of them in a large facility can have an adverse effect.
The report claimed that due to outdoor lighting and air conditioning use in summer months, there is a net cost saving from changing to compact fluorescent lighting in all climates. [169] The cost of CFL and LED bulbs has decreased greatly since 2008, which shortens the time needed to pay off their initial cost.
A 230-volt LED filament lamp, with an E27 base. The filaments are visible as the eight yellow vertical lines. An assortment of LED lamps commercially available in 2010: floodlight fixtures (left), reading light (center), household lamps (center right and bottom), and low-power accent light (right) applications An 80W Chips on board (COB) LED module from an industrial light luminaire, thermally ...
Low-pressure sodium lamps are highly efficient electrical light sources, but their yellow light restricts applications to outdoor lighting, such as street lamps, where they are widely used. [1] High-pressure sodium lamps emit a broader spectrum of light than the low-pressure lamps, but they still have poorer color rendering than other types of ...