Search results
Results from the WOW.Com Content Network
the medium gross density of 850 kg/m 3 to 1.100 kg/m 3 (white coloured blocks, suitable for standard usage) the high gross density blocks of 1.100 kg/m 3 to 1.500 kg/m 3 (reddish colour, suitable for walls with higher acoustic performance requirements) The dimensions of these blocks are: length 500 mm, height 500 mm. Four blocks thus make 1 m 2.
Drywall (also called plasterboard, dry lining, [1] wallboard, sheet rock, gib board, gypsum board, buster board, turtles board, slap board, custard board, gypsum panel and gyprock) is a panel made of calcium sulfate dihydrate , with or without additives, typically extruded between thick sheets of facer and backer paper, used in the construction ...
Gypsum waste from new construction activities is typically a clean waste, and primarily consists of off-cuts of plasterboard (drywall, wallboard or gyprock) when the boards have been cut to fit the dimensions of the wall or ceiling. The waste may constitute 15% of the gypsum materials used on the site.
The EUR-pallet's dimensions are defined in the following standards: UIC 435-2 Standard of quality for EUR flat pallets made of wood measuring 800 mm x 1200 mm (EUR-1) ISO 445 Pallets for materials handling - Vocabulary (ISO 445:2008) ISO 3676 Packaging—Unit Load Sizes—Dimensions; ISO 3394 Dimensions of Rigid Rectangular Packages, Transport ...
Typically they range in size from 30 by 48 inches (76 cm × 122 cm) to 36 by 60 inches (91 cm × 152 cm). They are, as one would expect, considerably heavier than the gypsum core type panels. Portland cement based panels are ideal for truly wet locations like shower surrounds and for locations where a Portland cement based thin-set material is ...
In use as early as 1900, rock lath (also known as "button board," "plaster board" or "gypsum-board lath"), is a type of gypsum wall board (essentially an early form of drywall) with holes spaced regularly to provide a 'key' for wet plaster. [3] Rock lath was typically produced in sheets sized 2 by 4 feet (610 by 1,220 mm).
Plaster was first used as a building material and for decoration in the Middle East at least 7,000 years ago. In Egypt, gypsum was burned in open fires, crushed into powder, and mixed with water to create plaster, used as a mortar between the blocks of pyramids and to provide a smooth wall facing.
Typical dimensions of today's "two by four" is 1.5 by 3.5 inches (38 mm × 89 mm) dimensional lumber prior to sanding and are typically placed 16 inches (406 mm) from each other's center, but sometimes also at 12 inches (305 mm) or 24 inches (610 mm).