Search results
Results from the WOW.Com Content Network
An external wastegate is a separate self-contained mechanism typically used with turbochargers that do not have internal wastegates. An external wastegate requires a specially constructed turbo manifold with a dedicated runner going to the wastegate.
A 3-port solenoid-type boost controller A 4-port solenoid-type boost controller (used for a dual-port wastegate). The purpose of a boost controller is to reduce the boost pressure seen by the wastegate's reference port, in order to trick the wastegate into allowing higher boost pressures than it was designed for.
Schematic of a typical turbo petrol engine. The simplest type of turbocharger is the free floating turbocharger. [44] This system would be able to achieve maximum boost at maximum engine revs and full throttle, however additional components are needed to produce an engine that is driveable in a range of load and rpm conditions. [44]
Hiereth et al. [48] show operating lines for various applications such as a full-load operating line for a passenger car engine, the effect of an uncontrolled turbocharger on a truck diesel engine and wastegate control on passenger diesel and gasoline engines, and the effect of altitude on a compressor operating line.
The BorgWarner developed turbo can produce up to 27 psi (1.9 bar) of boost thanks in part to its unique dual volute turbine housing and an electrically actuated wastegate. Instead of two side-by-side exhaust passages like on a regular twin-scroll turbocharger , in this design the two exhaust passages are concentric and allow for better use of ...
The Swashplate engine with the K-Cycle engine is where pairs of pistons are in an opposed configuration sharing a cylinder and combustion chamber. A Delta engine has three (or its multiple) cylinders having opposing pistons, aligned in three separate planes or 'banks', so that they appear to be in a Δ when viewed along the axis of the main-shaft.
The G16E-GTS is a turbocharged engine model with 10.5:1 compression ratio and D-4ST direct/port injection system with multi-oil jet piston cooling, large-diameter exhaust valves and a part-machined intake port. The turbo boost is set between 1.4 and 1.81 bar (20.3 and 26.3 psi).
The Peugeot 405 T16, launched in 1992, used a Garrett VAT25 variable-geometry turbocharger on its 2.0-litre 16-valve engine. The 2007 Porsche 911 Turbo has twin variable-geometry turbochargers on its 3.6-litre horizontally-opposed six-cylinder gasoline engine. In 2007, Acura introduced the RDX with Variable Geometry Turbocharger following a ...