Search results
Results from the WOW.Com Content Network
A 3-port solenoid-type boost controller A 4-port solenoid-type boost controller (used for a dual-port wastegate). The purpose of a boost controller is to reduce the boost pressure seen by the wastegate's reference port, in order to trick the wastegate into allowing higher boost pressures than it was designed for.
An external wastegate is a separate self-contained mechanism typically used with turbochargers that do not have internal wastegates. An external wastegate requires a specially constructed turbo manifold with a dedicated runner going to the wastegate.
The white area on the left side of the scale shows manifold vacuum under normal driving conditions, the short white dash is atmospheric pressure (engine off), the orange scale is where there is safe turbo boost, the red scale is boost above 0.5 - 0.7 bar where the wastegate may be opened or a fuel cut due to overboost may occur.
A growler is an electrical device primarily used for testing a motor for shorted coils. A growler consists of a coil of wire wrapped around an iron core and connected to a source of alternating current. When placed on the armature or stator core of a motor the growler acts as the primary of a transformer and the armature coils act as the ...
Added information on the valve types for both internal and external wastegates. Generalized external gates, because you can use one with a turbo that has an internal gate, added blurb that this involves welding the internal gate to avoid leaks. Fixed spelling mistake in wastegate chatter section.
1962: The first turbocharged production car engine was the Oldsmobile Turbo Jetfire used in the Oldsmobile Jetfire. [1] A Garrett AiResearch turbocharger with integral wastegate was used. [2] [3] [4] Power was significantly increased over the naturally aspirated engine, but reliability was poor and the production of this engine ceased in 1963.
The BorgWarner developed turbo can produce up to 27 psi (1.9 bar) of boost thanks in part to its unique dual volute turbine housing and an electrically actuated wastegate. Instead of two side-by-side exhaust passages like on a regular twin-scroll turbocharger , in this design the two exhaust passages are concentric and allow for better use of ...
In an internal combustion engine, a turbocharger (also known as a turbo or a turbosupercharger) is a forced induction device that is powered by the flow of exhaust gases. It uses this energy to compress the intake air, forcing more air into the engine in order to produce more power for a given displacement .