Search results
Results from the WOW.Com Content Network
The engine is a V-twin four-stroke, 895 cc (54.6 cu in) or 993 cc (60.6 cu in) displacement, fan-driven air-cooled, gasoline engine design. The larger displacement is achieved by increasing the stroke from 78 to 87 mm (3.1 to 3.4 in), but using the same bore of 86 mm (3.4 in).
A higher power 7-HP model was made (Engine Model# 84330) for use in heavier duty machines such as the single stage Snow Commander (2001–2008) and 2 stage Power Max 726TE/6000 (2004–2008); the extra horsepower was obtained using transfer ports in the piston and cylinder wall, and this model ran at the same operating speed as the 6.5 hp ...
The bearings have to be leak-tight. A hermetic seal, usually a liquid seal, is employed; a turbine oil at pressure higher than the hydrogen inside is typically used. A metal, e.g. brass, ring is pressed by springs onto the generator shaft, the oil is forced under pressure between the ring and the shaft; part of the oil flows into the hydrogen side of the generator, another part to the air side.
The Rotax 912 was first sold in 1989 in non-certificated form for use in ultralights and motorgliders. [3]The original 60 kW (80 hp) 912 UL engine has a capacity of 1,211 cc (73.9 cu in) and a compression ratio of 9.1:1, and is designed to work with regular automotive gasoline, with up to 10% ethanol.
Allis-Chalmers was a U.S. manufacturer of machinery for various industries.Its business lines included agricultural equipment, construction equipment, power generation and power transmission equipment, and machinery for use in industrial settings such as factories, flour mills, sawmills, textile mills, steel mills, refineries, mines, and ore mills.
Wincharger Incorporated became a wholly owned subsidiary of Zenith Radio Corporation and soon had generators all over the world. In 1968, AMICOR acquired Wincharger Company and changed the name to Winco. Manufacturing was moved to Le Center, Minnesota in 1977. In 1985, Control Data purchased Winco and joined a group of companies under the name ...
Regenerative cooling is a method of cooling gases in which compressed gas is cooled by allowing it to expand and thereby take heat from the surroundings. The cooled expanded gas then passes through a heat exchanger where it cools the incoming compressed gas.
Bore pitch is the distance between the centerline of a cylinder bore to the centerline of the next cylinder bore adjacent to it in an internal combustion engine.It's also referred to as the "mean cylinder width", "bore spacing", "bore center distance" and "cylinder spacing".