Ads
related to: where is a solenoid used for gas line
Search results
Results from the WOW.Com Content Network
The solenoid valve (small black box at the top of the photo) with input air line (small green tube) used to actuate a larger rack and pinion actuator (gray box) which controls the water pipe valve. Solenoid valves are also characterized by how they operate. A small solenoid can generate a limited force.
The solenoid can be useful for positioning, stopping mid-stroke, or for low velocity actuation; especially in a closed loop control system. A uni-directional solenoid would actuate against an opposing force or a dual solenoid system would be self cycling. The proportional concept is more fully described in SAE publication 860759 (1986).
This equation is valid for a solenoid in free space, which means the permeability of the magnetic path is the same as permeability of free space, μ 0. If the solenoid is immersed in a material with relative permeability μ r, then the field is increased by that amount: =.
The controlled part of the injector is a solenoid-operated spill valve. Normally, it is open, allowing the fuel to return to the supply line when the pump plunger descends. When the solenoid is energized, the spill valve closes, and the fuel is forced through the spray tip into the cylinder. The four phases of EUI operation are: Fill phase
In a solenoid-operated safety shutoff valve, a spring action closes the valve instantly when an electric current fails and the solenoid ceases to be energized. The solenoid circuit is generally arranged so that it is broken upon failure of any element of the system. This valve cannot be re-opened until the solenoid is again energized.
A variable force solenoid (VFS) is an electro-hydraulic device that controls pressure proportionally or inversely proportionally to a signal (voltage or current) obtained from the on-board controller of a powertrain. A low flow VFS is used as a signal level devices for transmission line pressure control or application of clutches.
Typically, this separate valve controls a high pressure or high flow feed. Pilot valves are useful because they allow a small and easily operated feed to control a much higher pressure or higher flow feed, which would otherwise require a much larger force to operate; indeed, this is even useful when a solenoid is used to operate the valve.
The solenoid coil has to counteract only the spring force. [8] Poppet valves are best known for their use in internal combustion and steam engines, but are used in general pneumatic and hydraulic circuits where a pulsed flow control is wanted. The pulse can be controlled by a combination of differential pressure and spring load as required.
Ads
related to: where is a solenoid used for gas line