enow.com Web Search

  1. Ads

    related to: 4 inch cedar lap siding

Search results

  1. Results from the WOW.Com Content Network
  2. Siding (construction) - Wikipedia

    en.wikipedia.org/wiki/Siding_(construction)

    Their product was used on large housing projects in the northeast and was purportedly the siding of choice for a 1947 Pennsylvania development, the first subdivision to solely use aluminium siding. Products such as 4,-6,-8-and-10-inch (100, 150, 200 and 250 mm) by 12-foot (3.7 m) unpainted aluminium panels, starter strips, corner pieces and ...

  3. Clapboard - Wikipedia

    en.wikipedia.org/wiki/Clapboard

    Depending on the diameter of the log, cuts are made from 4 + 1 ⁄ 2 to 6 + 1 ⁄ 2 inches (110 to 170 mm) deep along the full length of the log. Each time the log turns for the next cut, it is rotated 5 ⁄ 8 inch (16 mm) until it has turned 360°. This gives the radially sawn clapboard its taper and true vertical grain.

  4. Pole building framing - Wikipedia

    en.wikipedia.org/wiki/Pole_building_framing

    Siding materials for a pole building are most commonly rolled-rib 29-gauge enameled steel cut to length in 32-or-36-inch (813 or 914 mm) widths attached using color-matched screws with rubber washers to seal the holes. However, any standard siding can be used, including T1-11, vinyl, lap siding, cedar and even brick.

  5. Shiplap - Wikipedia

    en.wikipedia.org/wiki/Shiplap

    Shiplap is either rough-sawn 25 mm (1 in) or milled 19 mm (3 ⁄ 4 in) pine or similarly inexpensive wood between 76 and 254 mm (3 and 10 in) wide with a 9.5–12.7 mm (3 ⁄ 8 – 1 ⁄ 2 in) rabbet on opposite sides of each edge. [1] The rabbet allows the boards to overlap in this area.

  6. Framing (construction) - Wikipedia

    en.wikipedia.org/wiki/Framing_(construction)

    Studs usually consist of 1 + 1 ⁄ 2-by-3 + 1 ⁄ 2-inch (38 mm × 89 mm) or 1 + 1 ⁄ 2-by-5 + 1 ⁄ 2-inch (38 mm × 140 mm) lumber and are commonly spaced at 16 inches (410 mm) on center. This spacing may be changed to 12 or 24 inches (300 or 610 mm) on center depending on the load and the limitations imposed by the type and thickness of the ...

  7. Sill plate - Wikipedia

    en.wikipedia.org/wiki/Sill_plate

    In modern wood construction, sills usually come in sizes of 2×4, 2×6, 2×8, and 2×10. In stick framing, the sill is made of treated lumber, and is anchored to the foundation wall, often with J-bolts, to keep the building from coming off the foundation during a severe storm or earthquake. Building codes require that the bottom of the sill ...

  1. Ads

    related to: 4 inch cedar lap siding