Search results
Results from the WOW.Com Content Network
Blast furnaces differ from bloomeries and reverberatory furnaces in that in a blast furnace, flue gas is in direct contact with the ore and iron, allowing carbon monoxide to diffuse into the ore and reduce the iron oxide. The blast furnace operates as a countercurrent exchange process whereas a bloomery does not.
The Boudouard reaction is an important process inside a blast furnace. The reduction of iron oxides is not achieved by carbon directly, as reactions between solids are typically very slow, but by carbon monoxide. The resulting carbon dioxide undergoes a (reverse) Boudouard reaction upon contact with coke carbon.
Consequently, the structure of the granules becomes reinforced and can expand to two or three times their original volume. This expansion, or "swelling," of the granules can lead to blockage or significant damage to the blast furnace, highlighting the challenges associated with using pellets in blast furnace operations. [15]
The hot blast pumps hot air into the blast furnace. The hot blast temperature ranges from 900 to 1,300 °C (1,650 to 2,370 °F) depending on the design and condition. Oil, tar , natural gas, powdered coal and oxygen can be injected to combine with the coke to release additional energy and increase the percentage of reducing gases present ...
Blast furnace gas (BFG) [1] is a by-product of blast furnaces that is generated when the iron ore is reduced with coke to metallic iron. It has a very low heating value , about 3.5 MJ/m 3 (93 BTU /cu.ft), [ 2 ] because it consists of about 51 vol% nitrogen and 22 vol% carbon dioxide , which are not flammable.
The pig iron was melted in a running out furnace and then run out into a trough. This process oxidized the silicon to form a slag, which floated on the iron and was removed by lowering a dam at the end of the trough. The product of this process was a white metal, known as finers metal or refined iron.
Coking is the process of heating coal in the absence of oxygen to a temperature above 600 °C (1,112 °F) to drive off the volatile components of the raw coal, leaving behind a hard, strong, porous material with a high carbon content called coke.
Blast furnace 3, including the cast house, is one of the main components of the museum and features numerous information plates, exhibition pieces and documentary films on monitors. The blast furnace also serves as an observation platform. An elevator has been installed. A colorful light installation illuminates the blast furnace at night.