Search results
Results from the WOW.Com Content Network
6061-T6 aluminium standard heat treating process. T6 temper 6061 has been treated to provide the maximum precipitation hardening (and therefore maximum yield strength) for a 6061 aluminium alloy. It has an ultimate tensile strength of at least 290 MPa (42 ksi) and yield strength of at least 240 MPa (35 ksi).
Elastic properties describe the reversible deformation (elastic response) of a material to an applied stress.They are a subset of the material properties that provide a quantitative description of the characteristics of a material, like its strength.
6082 aluminium alloy is an alloy in the wrought aluminium-magnesium-silicon family (6000 or 6xxx series). It is one of the more popular alloys in its series (alongside alloys 6005, 6061, and 6063), although it is not strongly featured in ASTM (North American) standards.
6060 aluminium alloy is an alloy in the wrought aluminium-magnesium-silicon family (6000 or 6xxx series). It is much more closely related to the alloy 6063 than to 6061.The main difference between 6060 and 6063 is that 6063 has a slightly higher magnesium content.
It forms the Q phase (Al 4 Mg 8 Si 7 Cu 2). Copper leads to a denser dispersion of needle-shaped, semi-coherent excretion (cluster of magnesium and silicon). In addition, there is the phase before the for the Aluminium-copper alloys are typical. Alloys with higher copper content (alloyings 6061, 6056, 6013) are mainly used in aviation.
It has a chemical composition of 6% aluminum, 4% vanadium, 0.25% (maximum) iron, 0.2% (maximum) oxygen, and the remainder titanium. [19] It is significantly stronger than commercially pure titanium (grades 1-4) while having the same stiffness and thermal properties (excluding thermal conductivity, which is about 60% lower in Grade 5 Ti than in ...
6005 aluminium alloy is an alloy in the wrought aluminium-magnesium-silicon family (6000 or 6xxx series). It is closely related, but not identical, to 6005A aluminium alloy.
Density Young's Modulus Shear Modulus Bulk Modulus Poisson's Ratio Tensile Yield Stress Tensile Ultimate Stress Hardness Uniform Elongation Min: 4.429 g/cm 3 (0.160 lb/cu in): 104 GPa (15.1 × 10 ^ 6 psi)