Search results
Results from the WOW.Com Content Network
Engine displacement is the measure of the cylinder volume swept by all of the pistons of a piston engine, excluding the combustion chambers. [1] It is commonly used as an expression of an engine's size, and by extension as an indicator of the power (through mean effective pressure and rotational speed ) an engine might be capable of producing ...
The 224-cubic-inch (3.67 L) engine, the larger engine in this family, was introduced in 1917 for the 1918 model year and used only in the Series FA and FB. It had the same bore as the 171, but a longer stroke of 5 + 1 ⁄ 4 in (133 mm), giving it 37 horsepower (28 kW) at 2,000 rpm. Applications: 1918 Chevrolet Series FA (37 hp; 28 kW) [7]
The 153 cu in engine had a 3 + 7 ⁄ 8-inch (98 mm) bore and 3 + 1 ⁄ 4-inch (82.6 mm) stroke, with two overhead valves per cylinder actuated by pushrods and a 1-3-4-2 firing order. The Chevy II 's 194 cu in six-cylinder used a 3 + 9 ⁄ 16 -inch (90.5 mm) bore, which by 1964 was enlarged to match the 153 four-cylinder's resulting in a ...
Although it had had a larger displacement than its 261-cubic-inch (4.3 L) Stovebolt predecessor it was approximately 2 inches (51 mm) shorter and 1 ⁄ 4 inch (6.4 mm) lower. [54] Flywheel bolt pattern is the same as the six and V8, with 1 ⁄ 2 inch (12.7 mm) bolts for the flywheel if produced after the 1966 model year.
The inline six-cylinder 71 series engine was introduced as the initial flagship product of the Detroit Diesel Engine Division of General Motors in 1938.. This engine was in high demand during WWII, necessitating a dramatic increase in output: about 57,000 6-71s were used on American landing craft, including 19,000 on LCVPs, about 8,000 on LCM Mk 3, and about 9,000 in quads on LCIs; and 39,000 ...
Displacement was 196 cubic inches (3.2 L). [2] In 1915 a new L-head water-cooled 201 cubic inches (3.3 L) inline-four engine appeared. [ 3 ] While International's own engines underwent constant developments, the pace of truck production in the twenties was such that others' engines (from Waukesha , Buda , and Lycoming for instance) had to be ...
The ZZ632's iron block shares a mold with Chevrolet Performance's ZZ572 crate engines, but the castings are machined to accommodate the huge 632 cubic-inch displacement. The bore grows by 0.040 in (1.0 mm), compared to the 572-cubic-inch V8s, with most of the displacement gain coming from a stroke that is 0.375 in (9.5 mm) longer.
The 477-cubic-inch (7.8 L) 477 was released late in the 1940 model year, replacing the 451. It was the largest in the GMC straight-6 line until it was replaced by the 503 in 1950. It shares the same 5 inches (130 mm) stroke as the 426 and 451, with a 4 + 1 ⁄ 2 inches (110 mm) bore. It produced a maximum 154 hp @ 2600 rpm and 385 lb•ft ...