Search results
Results from the WOW.Com Content Network
The problem of flickering exists only when using the bulb in combination with magnetic ballast (electronic ballasts produce flicker-free light). HMI bulbs (running with magnetic ballast) present an inherent problem of possibly producing light on film or video with a noticeable flicker. This is caused by the method by which the unit produces light.
The light output of an incandescent lamp in a flashlight varies widely depending on the type of lamp. A miniature keychain lamp produces one or two lumens. A two-D-cell flashlight using a common prefocus-style miniature lamp produces on the order of 15 to 20 lumens of light [11] and a beam of about 200 candlepower.
A tactical light or weapon light is a flashlight used in conjunction with a firearm to aid low-light target identification, allowing the user to simultaneously aim a weapon and illuminate the target. Tactical lights can be handheld or mounted to the weapon with the light beam parallel to the bore.
A photograph showing two Fulton MX-991/U Flashlights, next to an unofficial reproduction and a standard angle-head flashlight. The MX-991/U Flashlight (aka GI Flashlight, Army flashlight, or Moonbeam [1]) from the TL-122 military flashlight series of 1937-1944 and is a development of the MX-99/U flashlight issued in 1963 [clarification needed].
A typical problem with cameras using built-in flash units is the low intensity of the flash; the level of light produced will often not suffice for good pictures at distances of over 3 metres (10 ft) or so. Dark, murky pictures with excessive image noise or "grain" will result. In order to get good flash pictures with simple cameras, it is ...
The common interfaces are SDI, Ethernet, USB, and HDMI (the latter's main role is outputting the video signal, but it can also accept a number of control commands). Alternatively, a tally light can be a separate device mounted on the camera body, lens, or tripod, but not connected to the camera electronically.
This process included a lengthy alignment process in which the vision engineer would work with the camera operator, to adjust the settings on both the actual camera and the CCU in tandem. [1] During production, it was the vision engineers' job to operate the CCUs and control both the exposure and the colour balance. So skilled and labour ...
An incident-light meter measures the true luminous exposure (in lux⋅seconds) arriving at a scene. The magnitude of guide numbers is a function of the following four variables: The total luminous energy (in lumen⋅seconds) emitted by the flash head (which is itself the product of the duration and the average luminous flux of a flash).