Search results
Results from the WOW.Com Content Network
It is the parent case for the 6.8mm Remington SPC, [1] which is in turn the parent case for the .224 Valkyrie. The .30 Remington, along with the 25 Remington, .32 Remington. and .35 Remington were created for use in the Remington Model 8 rifle, to compete against the .25-35 Winchester, .30-30 Winchester and .32 Winchester Special.
Starting with a .450 Bushmaster case, Remington trimmed the length to 1.525 in from the original 1.7 and necked it down to accept a conical .308 in diameter bullet with a 25-degree shoulder. [ 4 ] The rim size is .492 in and because the round generates 55,000 psi, Remington opted to use a .308 rifle bolt in a 5.56-sized rifle for increased case ...
Combat shells had either a partial brass case (1" long) with a long paper hull or a full (2.75" long) brass case and no paper hull. Sporting shells (used for trap shooting or hunting) either had a brass base with a full paper hull or a partial brass case (1/2" long) and a long paper hull.
Initial production for the Vietnam War loaded 00 buckshot into the same red plastic cases being used for sporting ammunition and was designated: Shell, shotgun, plastic case, 12 gauge, No. 00 buck, XM162. The shells were typically packaged as twelve ten-round cardboard boxes within a metal ammunition box. [1]
The dimension at that point on the .28 Nosler case is 0.051 mm (0.002 in) larger, and that reduces its body taper by just a tad. Maximum case lengths are 72.4 mm (2.850 in) and 65.8 mm (2.590 in) respectively. Shoulder angles are 30 degrees for the Remington cartridge and a slightly sharper 35 degrees for the Nosler.
The 6-pounder carriage weighed 900 lb (408 kg). [19] The 10-pounder Parrott rifle fired case shot (shrapnel), common shell, and canister shot. The use of bolts (solid shot) was rare and it was generally not provided in the ammunition chests. Firing shell without the fuse would accomplish the same result as firing a solid shot from a rifled gun ...
Cold forming. The parent case is well lubricated and forced carefully into the reloading die for the wildcat caliber. This will swage the case into a new shape. This type of operation is used for reducing case dimensions, such as changing the neck diameter or pushing the shoulder back. Fire forming. This consists of taking the parent case, or a ...
The .30-30 Winchester is typically limited to short ranges, primarily because of the relatively small case capacity and the 150-grain and 170-grain bullet weights. To compensate for this, Waters necked the cartridge down to use a 7 mm bullet (.284 inches), rather than the original .308 caliber (7.62 mm) bullet.