Search results
Results from the WOW.Com Content Network
When a material of unknown fracture toughness is tested, a specimen of full material section thickness is tested or the specimen is sized based on a prediction of the fracture toughness. If the fracture toughness value resulting from the test does not satisfy the requirement of the above equation, the test must be repeated using a thicker specimen.
The mode I fracture toughness for plane strain is defined as K I c = Y σ c π a {\displaystyle K_{\rm {Ic}}=Y\sigma _{c}{\sqrt {\pi a}}} where σ c {\displaystyle \sigma _{c}} is a critical value of the far field stress and Y {\displaystyle Y} is a dimensionless factor that depends on the geometry, material properties, and loading condition.
The methods of structural fracture mechanics are used as checking calculations to estimate sensitivity of a structure to its component failure. [citation needed] Catastrophe failure model and reserve ability of a complex system. The model [2] supposes that failure of several elements causes neighboring elements overloading. The model equation ...
In fracture mechanics, a crack growth resistance curve shows the energy required for crack extension as a function of crack length in a given material.For materials that can be modeled with linear elastic fracture mechanics (LEFM), crack extension occurs when the applied energy release rate exceeds the material's resistance to crack extension .
The stress intensity factor at the crack tip of a compact tension specimen is [4] = [() / / + / / + /] where is the applied load, is the thickness of the specimen, is the crack length, and is the effective width of the specimen being the distance between the centreline of the holes and the backface of the coupon.
Fracture mechanics is the field of mechanics concerned with the study of the propagation of cracks in materials. It uses methods of analytical solid mechanics to calculate the driving force on a crack and those of experimental solid mechanics to characterize the material's resistance to fracture.
The J-integral represents a way to calculate the strain energy release rate, or work per unit fracture surface area, in a material. [1] The theoretical concept of J-integral was developed in 1967 by G. P. Cherepanov [2] and independently in 1968 by James R. Rice, [3] who showed that an energetic contour path integral (called J) was independent of the path around a crack.
Crack growth programs grow a crack from an initial flaw size until it exceeds the fracture toughness of a material and fails. Because the fracture toughness depends on the boundary conditions, the fracture toughness may change from plane strain conditions for a semi-circular surface crack to plane stress conditions for a through crack. The ...