Search results
Results from the WOW.Com Content Network
Face milling operation. Facing on a milling machine is the process of cutting a flat surface perpendicular to the axes of the milling cutter. This process removes the material by rotating the facing tool in the counterclockwise direction as the table feeds the work piece across the cutter. Face milling can be achieved with an end mill, but is ...
Milling is the process of machining using rotary cutters to remove material [ 1 ] by advancing a cutter into a workpiece. This may be done by varying directions [ 2 ] on one or several axes, cutter head speed, and pressure. [ 3 ] Milling covers a wide variety of different operations and machines, on scales from small individual parts to large ...
Turning. Turning is a machining process in which a cutting tool, typically a non-rotary tool bit, describes a helix toolpath by moving more or less linearly while the workpiece rotates. Usually the term "turning" is reserved for the generation of external surfaces by this cutting action, whereas this same essential cutting action when applied ...
This type of process can be done during the roughing or finishing phase of the overall operation. [3] Facing: is an operation used to face the part down to specified dimension. Facing can be done using end mills or a special face mill. [4] [5] [6] Pocketing/Slotting: this is a process to make a pocket on the inside of the part.
Machining. CNC machine pouring coolant to keep the tool and parts from getting hot. Lathe machine. Machining is a manufacturing process where a desired shape or part is created using the controlled removal of material, most often metal, from a larger piece of raw material by cutting. Machining is a form of subtractive manufacturing, [1] which ...
The tool at E, a counterbore, is also often used for spotfacing in manual machining (not so much in CNC machining). A spotface or spot face is a machined feature in which a certain region of the workpiece (a spot) is faced, providing a smooth, flat, accurately located surface. This is especially relevant on workpieces cast or forged, where the ...
Cutting speed may be defined as the rate at the workpiece surface, irrespective of the machining operation used. A cutting speed for mild steel of 100 ft/min is the same whether it is the speed of the cutter passing over the workpiece, such as in a turning operation, or the speed of the cutter moving past a workpiece, such as in a milling operation.
Milling evolved from rotary filing, so there is a continuum of development between the earliest milling cutters known, such as that of Jacques de Vaucanson from about the 1760s or 1770s, [3] [4] through the cutters of the milling pioneers of the 1810s through 1850s (Whitney, North, Johnson, Nasmyth, and others), [5] to the cutters developed by ...