Search results
Results from the WOW.Com Content Network
Repeater frequency sets are known as "repeater pairs", and in the ham radio community most follow ad hoc standards for the difference between the two frequencies, commonly called the offset. In the USA two-meter band, the standard offset is 600 kHz (0.6 MHz), but sometimes unusual offsets, referred to as oddball splits, are used. The actual ...
A radio repeater is a combination of a radio receiver and a radio transmitter that receives a signal and retransmits it, so that two-way radio signals can cover longer distances. A repeater sited at a high elevation can allow two mobile stations, otherwise out of line-of-sight propagation range of each other, to communicate. [1]
M17 uses Frequency-Division Multiple Access (FDMA) technology in which different communication streams are separated by frequency and run concurrently. It utilizes 4,800 symbols per second, 4-level frequency-shift keying (4FSK) with a root Nyquist filter applied to the bitstream. Radio channels are 9 kHz wide, with channel spacing of 12.5 kHz.
An extensive digital repeater, or "digipeater" network provides transport for APRS packets on these frequencies. Internet gateway stations (IGates) connect the on-air APRS network to the APRS Internet System (APRS-IS), which serves as a worldwide, high-bandwidth backbone for APRS data. Stations can tap into this stream directly, and a number of ...
NHK digital television, KRY, TYS and YAB transmitter in Iwakuni. A broadcast relay station, also known as a satellite station, relay transmitter, broadcast translator (U.S.), re-broadcaster (Canada), repeater (two-way radio) or complementary station (Mexico), is a broadcast transmitter which repeats (or transponds) the signal of a radio or television station to an area not covered by the ...
The repeater input frequencies are exclusive to GMRS, and may be used only by licensed GMRS operators. GMRS operators are permitted to transmit at up to 50 watts transmitter power output, on the 16 main channels, [13] but transmitting 1 to 5 watts is more common in practice.
If a repeater is to be used, switch to 1–8 or 41–48 and press the duplex button. ... Frequency Spacing: Channel 1: 476.4250: Repeater Channel: ... Channel 19: 476 ...
The frequencies from 430 to 440 MHz are allocated on a secondary basis to licensed radio amateurs who are allowed to use up to 40 W (16 dBW) between 430 and 432 MHz and 400 W (26 dBW) between 432 and 440 MHz. Channels 1 to 14 are UK amateur repeater outputs and channels 62 to 69 are UK amateur repeater inputs.