Search results
Results from the WOW.Com Content Network
90-foot (27.43 m) radii on the elevated 4 ft 8 + 1 ⁄ 2 in (1,435 mm) standard gauge Chicago 'L'. There is no room for longer radii at this cross junction in the northwest corner of the Loop. The minimum railway curve radius is the shortest allowable design radius for the centerline of railway tracks under a particular set of conditions.
In a horizontal or vertical cable rail, the cables, once tensioned must be rigid enough to prevent a 4-inch sphere passing through it. Factors influencing this rigidity are: the tension of the cable, intermediate posts (or cable spacers) spacing, the diameter of the cable, top rail cap material and the cable to cable spacing. [7]
The American Society of Civil Engineers (or ASCE) specified rail profiles in 1893 [20] for 5 lb/yd (2.5 kg/m) increments from 40 to 100 lb/yd (19.8 to 49.6 kg/m). Height of rail equaled width of foot for each ASCE tee-rail weight; and the profiles specified fixed proportion of weight in head, web and foot of 42%, 21% and 37%, respectively.
Signals are most commonly mounted on trackside masts about 12 to 15 feet (3.7 to 4.6 m) high to put them in the eyeline of the engineer. Signals can also be mounted on signal bridges or cantilever masts spanning multiple tracks. Signal bridges and masts typically provide at least 20 feet (6.1 m) of clearance over the top of the rail.
Narrow gauge flat wagons, 750 mm (2 ft 5 + 1 ⁄ 2 in). Note the single buffer with a hook on the right side and a chain on the other. On some narrow-gauge lines in Europe, and on the Paris Metro, a simplified version of the loose-coupler is used, consisting of a single central buffer with a chain underneath. Sometimes there are two chains, one ...
Get AOL Mail for FREE! Manage your email like never before with travel, photo & document views. Personalize your inbox with themes & tabs. You've Got Mail!
One link is a hundredth part of a chain, which is 7.92 inches (20.1168 cm). [7] The surveyor's chain first appears in an illustration in a Dutch map of 1607, [8] and in an English book for surveyors of 1610. [9] In 1593 the English mile was redefined by a statute of Queen Elizabeth I as 5,280 feet, to tie in with agricultural practice.
The centre of the buffer on European railway vehicles must be between 940 and 1,065 mm above the top of rail. Spain was an exception for a long time. A buffer separation of 1,950 mm was specified there because of the force transmitted to the longitudinal beams of the wagons, which are further apart due to their broad gauge railways.