Search results
Results from the WOW.Com Content Network
Airsoft pellets (known as BBs) are spherical projectiles used by airsoft guns. Typically made of plastic , [ 1 ] they usually measure around 6 mm (0.24 in) in diameter (though selective models use 8 mm), [ 1 ] and weigh 0.20–0.40 g (3.1–6.2 gr), with the most common weights being 0.20 g and 0.25 g, while 0.28 g, 0.30 g, 0.32 g and 0.40 g ...
Most stock airsoft guns have 6.03–6.05 mm (0.237–0.238 in) bore barrels, but best performance [27] is usually seen with "tightbore" barrels, which are 6.01–6.05 mm (0.237–0.238 in) in diameter. However, the tighter the bore, the more likely the chance of a pellet jam, and subsequently, tightbores need to be cleaned and lubricated regularly.
Airsoft is safe when played with proper protective gear. Most airsoft guns on the market are usually below 350 ft/s (110 m/s), but projectiles expelled from any type of airsoft gun can travel as slow as 65 ft/s (20 m/s) to more than 700 ft/s (210 m/s) and are capable of breaking skin at 350–400 ft/s (110–120 m/s).
The 357 Auto can be loaded with bullets in .358-caliber, while still fitting within the AR-15 COAL of 2.260". Bullet weights are currently available between 225gr-310gr 358 Yeti : Uses standard military 7.62x51 cases (also .308), length is trimmed, shoulder is reformed, neck is sized to .358".
The KAC PDW fires a 6×35 mm cartridge, which is over a centimeter shorter than the 5.56×45mm NATO round. The 6mm bullet is slightly wider, and the standard 6×35mm bullet slightly heavier, than the standard 5.56mm bullet (65 grains (4.2 g) versus 62 grains (4.0 g)).
Water bead ammunition. A gel ball blaster, also known as a water gel blaster, orbeez gun, gel gun, gel shooter, gel marker, hydro gel blaster, water bead blaster or gelsoft gun, is a toy gun similar in design to airsoft guns, but the projectiles they shoot are 7–8mm (depending on the replica) superabsorbent polymer water beads (most commonly sodium polyacrylate, colloquially called gel balls ...
According to Guns & Ammo magazine, Performance is on a par with the 10 mm, yet pressures are much milder. Factory ammo is loaded to +P .45 levels, but the lighter bullet weights make recoil comparable to .45 hardball loads. Felt recoil is a little sharper but still very controllable. [5]
Armour-piercing ammunition (AP) is a type of projectile designed to penetrate armour protection, most often including naval armour, body armour, and vehicle armour. [1]The first, major application of armour-piercing projectiles was to defeat the thick armour carried on many warships and cause damage to their lightly armoured interiors.