Search results
Results from the WOW.Com Content Network
1050 aluminium alloy is an aluminium-based alloy in the "commercially pure" wrought family (1000 or 1xxx series [1]). As a wrought alloy, it is not used in castings. As a wrought alloy, it is not used in castings.
The SAE steel grades system is a standard alloy numbering system (SAE J1086 – Numbering Metals and Alloys) for steel grades maintained by SAE International. In the 1930s and 1940s, the American Iron and Steel Institute (AISI) and SAE were both involved in efforts to standardize such a numbering system for steels. These efforts were similar ...
Where x is the material type (only 1 is specified so far), yy is the steel group number (specified in EN10027-2) and zz(zz) is a sequential number designated by the certifying body, the number in brackets being unused but reserved for later use. The steel groups are indicated below:
Many material or standard specifications include a number of different UNS numbers that may be used within that specification. For example: UNS S30400 (SAE 304, Cr/Ni 18/10, Euronorm 1.4301 stainless steel) could be used to make stainless steel bars or stainless steel plates for pressure vessels or pipes . Conversely, A312 pipes could be made ...
Welding — Recommendations for welding of metallic materials — Part 1: General guidance for arc welding EN 1011-2: Welding — Recommendations for welding of metallic materials — Part 2: Arc welding of ferritic steels EN 1011-3: Welding — Recommendations for welding of metallic materials — Part 3: Arc welding of stainless steels EN 1011-4
Microstructures of four kinds of duplex stainless steel in each direction. Duplex stainless steels are usually divided into three groups based on their pitting corrosion resistance, characterised by the pitting resistance equivalence number, PREN = %Cr + 3.3 %Mo + 16 %N.
Typical material properties for 2014 aluminium alloy are: [5] Density: 2.80 g/cm 3, or 175 lb/ft 3. Young's modulus: 73 GPa, or 11 Msi. Electrical conductivity: 34 to 50% IACS. Ultimate tensile strength: 190 to 480 MPa, or 28 to 70 ksi. Thermal Conductivity: 130 to 190 W/m-K. Thermal Expansion: 23 μm/m-K.
The aluminium-copper alloys have high strength, but are generally less corrosion resistant and harder to weld than other types of aluminium alloys. To compensate for the lower corrosion resistance, 2219 aluminium can be clad in a commercially pure alloy such as 1050 or painted.