Ads
related to: aspect ratio tire chart sizetirerack.com has been visited by 100K+ users in the past month
Search results
Results from the WOW.Com Content Network
Prior to 1964, tires were all made to a 90% aspect ratio. Tire size was specified as the tire width in inches and the diameter in inches – for example, 6.50-15. [34] From 1965 to the early 1970s, tires were made to an 80% aspect ratio. Tire size was again specified by width in inches and diameter in inches.
Increasing the aspect ratio will increase the height of the tire and hence the circumference. Off-roading tires may use a different measurement scheme: Tread width × Outside diameter, followed by wheel size (all in inches) – for example 31×10.50R15 (787 mm × 267 mm R380 in metric designation). The size of the wheel, however, is denoted as ...
Uniform Tire Quality Grading, commonly abbreviated as UTQG, is a set of standards for passenger car tires that measures a tire's treadwear, temperature resistance and traction. The UTQG was created by the National Highway Traffic Safety Administration in 1978, a branch of the United States Department of Transportation (DOT). [ 1 ]
For the 1981 season the maximum diameter of the rear tyre was limited to 26.0", while the diameter of the front tyres was increased. Therefore, from 1981 until 1992, Goodyear supplied white sidewall marked Eagle tyres with the sizes of 25.0"×10.0"–13" in the front and 26.0"×15.0"–13" in the rear. [6]
Plus sizing is the practice of replacing an automotive wheel with one of a larger diameter fitted with a new tire of lower aspect ratio so that the new tire has close to the same diameter and circumference as the original tire to minimize any changes in speedometer accuracy, torque and traction control, while reducing sidewall flex and (generally) increasing cornering ability.
2 or 3 digit number: The "aspect ratio" of the sidewall height to the total width of the tyre, as a percentage. An optional letter indicating construction of the fabric carcass of the tyre: B: bias belt (where the sidewalls are the same material as the tread, leading to a rigid ride) D: diagonal; R: radial. if omitted, then it is a cross ply tyre
Ads
related to: aspect ratio tire chart sizetirerack.com has been visited by 100K+ users in the past month