Search results
Results from the WOW.Com Content Network
This reflective array television antenna consists of eight "bowtie" dipole driven elements mounted in front of a wire screen reflector. The X-shaped dipoles give it a wide bandwidth to cover both the VHF (174–216 MHz) and UHF (470–700 MHz) bands. It has a gain of 5 dB VHF and 12 dB UHF and an 18 dB front-to-back ratio.
The television broadcast bands are too wide in frequency to be covered by a single antenna, so the two options are separate antennas used for the VHF and UHF bands or a combination (combo) VHF/UHF antenna. [6] A VHF/UHF antenna combines two antennas feeding the same feedline mounted on the same support boom.
The IEEE defines the UHF radar band as frequencies between 300 MHz and 1 GHz. [3] Two other IEEE radar bands overlap the ITU UHF band: the L band between 1 and 2 GHz and the S band between 2 and 4 GHz. UHF television antenna on a residence. This type of antenna, called a Yagi–Uda antenna, is widely used at UHF frequencies.
An example is maintenance work at one antenna of a medium wave transmission site that has two antennas transmitting on two frequencies. Then the other antenna can be used for broadcasting both channels. If it is not possible to build a second antenna for the second transmitter due to space constraints, then the diplexer is used permanently.
Frequencies immediately below VHF are denoted high frequency (HF), and the next higher frequencies are known as ultra high frequency (UHF). VHF radio waves propagate mainly by line-of-sight, so they are blocked by hills and mountains, although due to refraction they can travel somewhat beyond the visual horizon out to
An antenna array (or array antenna) is a set of multiple connected antennas which work together as a single antenna, to transmit or receive radio waves. [ 1 ] : p.149 [ 2 ] The individual antennas (called elements ) are usually connected to a single receiver or transmitter by feedlines that feed the power to the elements in a specific phase ...
Corner reflector UHF TV antenna from 1954 with bowtie dipole driven element. A corner reflector antenna is a type of directional antenna used at VHF and UHF frequencies. [1] [2] It was invented by John D. Kraus in 1938. [3] [4] It consists of a dipole driven element mounted in front of two flat rectangular reflecting screens joined at an angle ...
A desirable null exists if the transmit antenna is located exactly below the receive antenna beyond a minimum distance. Almost the same isolation as a low-grade duplexer (about −60 decibels) can be accomplished by installing the transmit antenna below, and along the centerline of, the receive antenna.