Search results
Results from the WOW.Com Content Network
Early VGA cards also used this connector. VGA connector (DE-15) Became a nearly ubiquitous analog computer display connector after first being introduced with IBM x86 machines. Older VGA connectors were DE-9 (9-pin). The modern DE-15 connector can carry Display Data Channel to allow the monitor to communicate with the graphics card, and ...
The compact size lets a low-profile card support two high resolution displays, and a full-height card (with two DMS-59 connectors) up to four high resolution displays. The DMS-59 connector was used by e.g. AMD , Nvidia and Matrox for video cards sold in some Lenovo ThinkStation models, Viglen Genies and Omninos, Dell, HP and Compaq computers.
Super VGA virtual screens Allows software to set up virtual display resolutions, larger than the actual displayed resolution, and smoothly scroll or pan around the larger image. High Color and TrueColor modes Industry standard 16-bit and 24-bit graphics modes for resolutions from 320×200 up to 1600 × 1200.
This 9-pin variant of the then-emerging de-facto standard 15-pin connector omitted several pins, which was considered acceptable, because the autodetection features supported by those pins only evolved over time, and prior to Windows 95, there was no user expectation of graphics cards and displays being fully plug and play. DE-9 VGA connectors ...
Microsoft Windows features a standard "Plug and Play Monitor" driver which uses the display's EDID information to construct a list of supported monitor modes. The Display Resolution control panel applet can be used to disable this driver's Plug and Play features and manually select any resolution or refresh rate supported by the video card. [13]
VESA Plug and Display (abbreviated as P&D) is a video connector that carries digital signals for monitors, such as flat panel displays and video projectors, ratified by Video Electronics Standards Association (VESA) in 1997.
Its 2D support rivaled the best cards available for performance and quality, however. It was not uncommon to pair up the Mystique or another Matrox card with a 3Dfx Voodoo Graphics 3D-only board because the Voodoo cards were the fastest and most well-supported 3D accelerators at the time. Detractors, however, referred to the card as the "Matrox ...
TGA graphics are built into the motherboards of Tandy computers. The PCjr uses a custom monitor with a unique 18-pin plug, [15] but an adapter (with the same DE-9 connector and pinout as IBM's CGA/EGA) can connect it to the IBM Color Display or similar 4-bit digital RGBI monitor. [16] The Tandy 1000 provides the DE-9 connector directly. [17]