Search results
Results from the WOW.Com Content Network
.950 JDJ cases are approximately 70 mm in length, and are based on a 20×102mm Vulcan case shortened and necked up to accept the .950 in (24.1 mm) bullet. Projectiles are custom-made and most commonly weigh 3,600 grains (230 g) which is 8.2 ounces or over half a pound.
The M1 ammo crate held a total of 1,000 belted or linked rounds packed in 4 M1 ammo boxes and the later M1A1 ammo crate held a total of 1,000 belted or 1,100 linked rounds packed in M1A1 ammo boxes. There were two .50 M2 ammo boxes to a crate (for a total of 220 belted or 210 linked rounds) with a volume of 0.93 cubic feet.
Bullets had the manufacturer code over the Quarter number and two-digit year of production engraved on the base (e.g. Pk/2-26 is Zaklady Amunicyjne, Pocisk, 2nd Quarter of 1926). 8mm Lebel "Balle D" bullets were differenced from 7.9mm Mauser bullets by a capital letter "D" inset between the contractor code and the date (e.g. Pk/D/2-26).
The differences between the two are the bullet shape, the types of powder used, and that the case of the 12.7×108mm is 9 mm longer and marginally more powerful. 14.5×114mm : The 14.5×114 mm is a heavy machine gun and anti-materiel rifle round used by the Soviet Union, the former Warsaw Pact, modern Russia, and other countries.
This is a list of firearm cartridges that have bullets in the 9 millimeters (0.35 in) to 9.99 millimeters (0.393 in) caliber range. Case length refers to the round case length. OAL refers to the overall length of the loaded round. All measurements are given in millimeters, followed by the equivalent in inches between parentheses.
The United States National Research Council released a report in 2008 that endorsed the investigation of microstamping as an alternative to ballistic markings.It had concluded that a national database of ballistic markings is unworkable and that there is not enough scientific evidence that, "every gun leaves microscopic marks on bullets and cartridge cases that are unique to that weapon and ...
An assortment of snap caps of varying calibers, from left: (1st row) .22 LR, 9mm (both), .45 ACP, (2nd row) 30-06 (both), (3rd row) 12 Ga. A snap cap is a firearm accessory device shaped like a standard cartridge/shotshell but contains no functional components, namely the primer, propellant and projectile (bullet or slug).
The 9×39 is based on the Soviet 7.62×39mm case but with the neck expanded to fit a 9.2mm bullet. The final design was completed by N. Zabelin, L. Dvoryaninova, and Y. Frolov of the TsNIITochMash in the 1980s. The intent was to create a more stealthy cartridge for suppressed firearms used by Spetsnaz and other special troops that had more ...