Search results
Results from the WOW.Com Content Network
Infrasound arrays at monitoring station in Qaanaaq, Greenland. Infrasound , sometimes referred to as low frequency sound or subsonic , describes sound waves with a frequency below the lower limit of human audibility (generally 20 Hz , as defined by the ANSI/ASA S1.1-2013 standard). [ 1 ]
Some detective work implicated a newly-installed extractor fan, found by Tandy, that was generating infrasound of 18.9 Hz, 0.3 Hz, and 9 Hz. A long-range acoustic device ( LRAD ) produces a 30 degree cone of audible sound in frequencies within the human hearing spectrum (20 - 20000 Hz).
However, this range is an average and will slightly change from individual to individual. Sound waves that have frequencies below 16 Hz are called infrasonic and those above 20 kHz are called ultrasonic. Sound is a mechanical wave and as such consists physically in oscillatory elastic compression and in oscillatory displacement of a fluid.
The bypass ratio (BPR) of a turbofan engine is the ratio between the mass flow rate of the bypass stream to the mass flow rate entering the core. [1] A 10:1 bypass ratio, for example, means that 10 kg of air passes through the bypass duct for every 1 kg of air passing through the core.
A signal generator is one of a class of electronic devices that generates electrical signals with set properties of amplitude, frequency, and wave shape. These generated signals are used as a stimulus for electronic measurements, typically used in designing, testing, troubleshooting, and repairing electronic or electroacoustic devices, though it often has artistic uses as well.
A resistor at a certain temperature has a thermal noise associated with it. A noise generator might have two resistors at different temperatures and switch between the two resistors. The resulting output power is low. (For a 1 kΩ resistor at room temperature and a 10 kHz bandwidth, the RMS noise voltage is 400 nV. [3])
Sound reinforcement in a large format system typically involves a signal path that starts with the signal inputs, which may be instrument pickups (on an electric guitar or electric bass) or a microphone that a vocalist is singing into or a microphone placed in front of an instrument or guitar amplifier.
A generator in electrical circuit theory is one of two ideal elements: an ideal voltage source, or an ideal current source. [1] These are two of the fundamental elements in circuit theory. Real electrical generators are most commonly modelled as a non-ideal source consisting of a combination of an ideal source and a resistor.