Search results
Results from the WOW.Com Content Network
The aeration stage and the disinfecting stage are the primary differences from a traditional septic system; in fact, an aerobic treatment system can be used as a secondary treatment for septic tank effluent. [1] These stages increase the initial cost of the aerobic system, and also the maintenance requirements over the passive septic system.
A septic tank is an underground chamber made of concrete, fiberglass, or plastic through which domestic wastewater flows for basic sewage treatment. [2] Settling and anaerobic digestion processes reduce solids and organics, but the treatment efficiency is only moderate (referred to as "primary treatment"). [2]
In the subsequent aerobic phase, these bacteria can accumulate large quantities of polyphosphate within their cells and the removal of phosphorus is said to be enhanced. [2] EBPR can also integrate biological nitrogen removal through the addition of an anoxic zone where nitrate is present due to the denitrification capabilities of some PAO. [3]
Activated sludge tank at Beckton sewage treatment plant, UK.The white bubbles are due to the diffused air aeration system. The activated sludge process is a type of biological wastewater treatment process for treating sewage or industrial wastewaters using aeration and a biological floc composed of bacteria and protozoa.
The rotating packs of disks (known as the media) are contained in a tank or trough and rotate at between 2 and 5 revolutions per minute. Commonly used plastics for the media are polyethylene, PVC and expanded polystyrene. The shaft is aligned with the flow of wastewater so that the discs rotate at right angles to the flow, with several packs ...
A septic drain field, a septic tank, and associated piping compose a septic system. The drain field typically consists of an arrangement of trenches containing perforated pipes and porous material (often gravel ) covered by a layer of soil to prevent animals (and surface runoff ) from reaching the wastewater distributed within those trenches. [ 1 ]
If there is a suitable septic tank in place, pumping the effluent from the tank is the lowest cost option for initial costs. Whether the septic tank is the lowest cost option over time depends on the cost of electricity in the area, how often the tank must be emptied and how much it costs to have the solids pumped out of the tank.
The tanks have a “flow through” system, with raw wastewater (influent) coming in at one end and treated water (effluent) flowing out the other. In systems with multiple tanks, while one tank is in settle/decant mode the other is aerating and filling. In some systems, tanks contain a section known as the bio-selector, which consists of a ...