Search results
Results from the WOW.Com Content Network
Nameplate capacity, also known as the rated capacity, nominal capacity, installed capacity, maximum effect or gross capacity, [1] is the intended full-load sustained output of a facility such as a power station, [2] [3] electric generator, a chemical plant, [4] fuel plant, mine, [5] metal refinery, [6] and many others.
Perkins Diesel Conversions & Factory fitted units, by Allan T. Condie, 2nd edition 2000, ISBN 0-907742-79-3 The 4 107T was used in UK Military electricity generating sets, the engines when in need an overhaul were rebuilt by a Kent based engineering works in Ramsgate, adjacent to the inner Harbour known as Walkers Marine (Marine Engineers) Ltd. Houchins of Ashford an MOD contractor would send ...
Set sizes range from 8 to 30-kW (also 8 to 30-kVA single phase) for homes, small shops, and offices, with the larger industrial generators from 8-kW (11 kVA) up to 2,000-kW (2,500-kVA three phase) used for office complexes, factories, and other industrial facilities. A 2,000-kW set can be housed in a 40 ft (12 m) ISO container with a fuel tank ...
1,100 pound force-feet (1,491 N⋅m) at 1300 rpm, 330 horsepower (246 kW; 335 PS) electronically governed at 2200 rpm Natural gas-powered urban bus (L Gas Plus, ISL G, ISL G NZ, L9N) [ 6 ] [ 7 ] 900 pound force-feet (1,220 N⋅m) at 1300 rpm, 280 horsepower (209 kW; 284 PS) electronically governed at 2000 rpm
Toshiba 660 MVA water cooled 23 kV AC turbo generator: 1,342 t 2,959,000 lb 660 MW 890,000 hp 0.49 kW/kg 0.30 hp/lb Bayswater, Eraring coal-fired power stations: Canopy Tech. Cypress 32 MW 15 kV AC PM generator [29] 33,557 kg 73,981 lb 32 MW 43,000 hp 0.95 kW/kg 0.58 hp/lb Electric power stations: Turncircles AF24PM–S axial flux motor [30]
Allis-Chalmers was a U.S. manufacturer of machinery for various industries.Its business lines included agricultural equipment, construction equipment, power generation and power transmission equipment, and machinery for use in industrial settings such as factories, flour mills, sawmills, textile mills, steel mills, refineries, mines, and ore mills.
The list price was $12 million in 2011. [26] At the start of its production in 2016, each GTF was costing PW $10m to build, more than the sale price, but should become less than $2m per engine. [27] MTU provides the first four stages of the high-pressure compressor, the low-pressure turbine and other components.
This is a list of the power supply systems that are, or have been, used for railway electrification. Note that the voltages are nominal and vary depending on load and distance from the substation. As of 2023 [update] many trams and trains use on-board solid-state electronics to convert these supplies to run three-phase AC traction motors.