Search results
Results from the WOW.Com Content Network
Therefore, when concreting at cold temperature cannot be avoided, it is essential to have a minimum curing time at a temperature sufficiently above the freezing point of the concrete pore water, so that the early strength of concrete is high enough to resist the inner tensile stress caused by water freezing. [5]
Cast-in-place concrete or Cast-in-situ concrete is a technology of construction of buildings where walls and slabs of the buildings are cast at the site in formwork. [1] This differs from precast concrete technology where slabs are cast elsewhere and then brought to the construction site and assembled. [2] It uses concrete slabs for walls ...
If the surface of the concrete pour is insulated from the outside temperatures, the heat of hydration will prevent freezing. The American Concrete Institute (ACI) definition of cold weather placement, ACI 306, [128] is: A period when for more than three successive days the average daily air temperature drops below 40 °F (~ 4.5 °C), and
A concrete slab is a common structural element of modern buildings, consisting of a flat, horizontal surface made of cast concrete. Steel- reinforced slabs, typically between 100 and 500 mm thick, are most often used to construct floors and ceilings, while thinner mud slabs may be used for exterior paving ( see below ).
Ground freezing is a construction technique used in circumstances where soil needs to be stabilized so it will not collapse next to excavations, or to prevent contaminants spilled into soil from being leached away. [1]
Photograph taken 21 March 2010 in Norwich, Vermont. Frost heaving (or a frost heave) is an upwards swelling of soil during freezing conditions caused by an increasing presence of ice as it grows towards the surface, upwards from the depth in the soil where freezing temperatures have penetrated into the soil (the freezing front or freezing boundary).
The precast concrete double-wall panel has been in use in Europe for decades. The original double-wall design consisted of two wythes of reinforced concrete separated by an interior void, held together with embedded steel trusses. With recent concerns about energy use, it is recognized that using steel trusses creates a "thermal bridge" that ...
Self-consolidating concrete or self-compacting concrete (SCC) [1] is a concrete mix which has a low yield stress, high deformability, good segregation resistance (prevents separation of particles in the mix), and moderate viscosity (necessary to ensure uniform suspension of solid particles during transportation, placement (without external compaction), and thereafter until the concrete sets).