Search results
Results from the WOW.Com Content Network
Wood can also be coloured by exposing it to chemicals that react with the wood to form coloured compounds. Chemical staining of wood is rarely carried out because it is easier to colour wood using dye or pigmented stain, however, ammonia fuming is a chemical staining method that is still occasionally used to darken woods such as oak that ...
Quarry tile is a building material, usually 1 ⁄ 2 to 3 ⁄ 4 inch (13 to 19 mm) thick, made by either the extrusion process or more commonly by press forming and firing natural clay or shales. [ 1 ] [ 2 ] Quarry tile is manufactured from clay in a manner similar to bricks . [ 3 ]
Open-cell foam is porous so it will let gasses through which could otherwise cause blistering of the caulk or sealant. Additionally, open-cell backer rod allows air to get to the back side of the caulk or sealant which accelerates curing when used with air-cured sealants such as silicone. Open-cell rod is more compressible than closed-cell foam ...
Ammonia fuming is a wood finishing process that darkens wood and brings out the grain pattern. It consists of exposing the wood to fumes from a strong aqueous solution of ammonium hydroxide which reacts with the tannins in the wood. The process works best on white oak because of the high tannin content of this wood.
Coatings were prepared by moisture curing of IPDI capped hydroxyl terminated polybutadiene/clay dispersions in a relative humidity (RH) of 50% at 25 °C. Moisture cured polyurethane–urea coatings have been made by reacting 1,2,3-triazole rich polyether polyols with HMDI at NCO/OH eq. ratio of 1.2 to obtain isocyanate-terminated polyurethane ...
RTV silicone rubbers are, however, generally expensive – especially platinum-cure. They are also sensitive to substances (sulfur-containing modelling clay such as Plastilina, for example) that may prevent the silicone from curing (referred to as cure inhibition). Silicones are usually very thick (high viscosity), and must be vacuum degassed ...
The mixture sets in 4-6 hours and fully cures in up to 15 hours. It can be used as an adhesive, laminate, plug, filler, sealant, or electrical insulator and can be drilled, ground, tapped, machined, sanded, and painted when cured. J-B Kwik is a faster-curing two-part epoxy with medium-temperature resistance up to 300 °F (149 °C).
Grout sealer is a water-based or solvent-based sealant applied over dried grout that resists water, oil, and acid-based contaminants. Grout cleaner is a basic cleaning solution that is applied on grout lines and removes the dirt and dust. [9] A die grinder is used for faster removal of old grout compared to a standard grout saw.