Search results
Results from the WOW.Com Content Network
The most commonly used is the center-fed half-wave dipole which is just under a half-wavelength long. The radiation pattern of the half-wave dipole is maximum perpendicular to the conductor, falling to zero in the axial direction, thus implementing an omnidirectional antenna if installed vertically, or (more commonly) a weakly directional ...
When the antenna is fed at a point of maximum current, as in the common center-fed half-wave dipole or base-fed quarter-wave monopole, that value is mostly the radiation resistance. However, if the antenna is fed at some other point, the equivalent radiation resistance at that point R r a d 1 {\displaystyle \ R_{\mathsf {rad\ 1}}\ } can easily ...
The driven element of the antenna is usually a half-wave dipole, its length half a wavelength of the radio waves used. The parasitic elements are of two types. A "reflector" is slightly longer (around 5%) than a half-wavelength. It serves to reflect the radio waves in the opposite direction.
Folded dipole A typical folded dipole is two half-wave dipoles mounted parallel to each other, a few inches apart, with the far ends connected. Only one of the dipoles is fed, and the second dipole connects straight through the center where the first has the usual feedpoint.
Animated diagram of a half-wave dipole antenna receiving a radio wave. The antenna consists of two metal rods connected to a receiver R. The electric field (E, green arrows) of the incoming wave results in oscillation of the electrons in the rods, charging the ends alternately positive (+) and negative (−).
The electric field strength at a specific point can be determined from the power delivered to the transmitting antenna, its geometry and radiation resistance. Consider the case of a center-fed half-wave dipole antenna in free space, where the total length L is equal to one half wavelength (λ/2).
Antenna measurement techniques refers to the testing of antennas in order to ensure that the antenna meets specifications or simply to characterize it. Typical antenna parameters are gain, bandwidth, radiation pattern, beamwidth, polarization, impedance; These are imperative communicative means.
Two element dipole array in front of a one wavelength square reflector used as gain standard. The gain of practical array antennas is limited to about 25–30 dB. Two half wave elements spaced a half wave apart and a quarter wave from a reflecting screen have been used as a standard gain antenna with about 9.8 dBi at its design frequency. [4]