Search results
Results from the WOW.Com Content Network
The radiation level measured was 72.9 sieverts per hour. Because of this, the endoscope could only function for a few hours. For reactors number 1 and 3, no endoscopic survey was planned at that time, because the actual radiation levels were too high for humans. [34] [dead link ] [35] [36]
Radiation fluctuated widely on the site after the tsunami and often correlated to fires and explosions on site. Radiation dose rates at one location between reactor units 3 and 4 was measured at 400 mSv/h at 10:22 JST, 13 March, causing experts to urge rapid rotation of emergency crews as a method of limiting exposure to radiation. [99]
In most reactors it takes the form of a sealed metallic or ceramic layer. It also serves to trap fission products, especially those that are gaseous at the reactor's operating temperature, such as krypton, xenon and iodine. Cladding does not constitute shielding, and must be developed such that it absorbs as little radiation as possible.
More than 30 people were over-exposed to radiation when the starboard reactor cooling system failed and the reactor temp rose uncontrollably. Emergency repairs ordered by the captain successfully cooled the reactor and avoided meltdown, but exposed the workers to high levels of radiation. [17] 8 Radiation accident in Morocco: 1984 March
Radiation hardening is the process of making electronic components and circuits resistant to damage or malfunction caused by high levels of ionizing radiation (particle radiation and high-energy electromagnetic radiation), [1] especially for environments in outer space (especially beyond low Earth orbit), around nuclear reactors and particle accelerators, or during nuclear accidents or nuclear ...
The effects of a nuclear meltdown depend on the safety features designed into a reactor. A modern reactor is designed both to make a meltdown unlikely, and to contain one should it occur. In a modern reactor, a nuclear meltdown, whether partial or total, should be contained inside the reactor's containment structure.
The Fukushima Daiichi nuclear disaster in 2011 occurred due to a loss-of-coolant accident. The circuits that provided electrical power to the coolant pumps failed causing a loss-of-core-cooling that was critical for the removal of residual decay heat which is produced even after active reactors are shut down and nuclear fission has ceased.
Radiation monitors in general have a number of process-control applications in nuclear power plants; [9] a major CPAM application in this area is the monitoring of the air intake for the plant control room. In the event of an accident, high levels of airborne radioactivity could be brought into the control room by its HVAC system; the CPAM ...