enow.com Web Search

Search results

1. Results from the WOW.Com Content Network

2. Tire code - Wikipedia

   en.wikipedia.org/wiki/Tire_code

   Prior to 1964, tires were all made to a 90% aspect ratio. Tire size was specified as the tire width in inches and the diameter in inches – for example, 6.50-15. [24] From 1965 to the early 1970s, tires were made to an 80% aspect ratio. Tire size was again specified by width in inches and diameter in inches.

3. ISO 5775 - Wikipedia

   en.wikipedia.org/wiki/ISO_5775

   The section height of a tire is usually identical to its section width (for tires less than 28 mm, 2.5 mm have to be added to the width to get the height). The overall diameter of the tire is then the rim diameter plus twice the tire's section height. The ISO 5775-1 standard also defines procedures for measuring tires and for calculating from ...

4. Wheel sizing - Wikipedia

   en.wikipedia.org/wiki/Wheel_sizing

   Increasing the aspect ratio will increase the height of the tire and hence the circumference. Off-roading tires may use a different measurement scheme: Tread width × Outside diameter, followed by wheel size (all in inches) – for example 31×10.50R15 (787 mm × 267 mm R380 in metric designation). The size of the wheel, however, is denoted as ...

5. Ride height - Wikipedia

   en.wikipedia.org/wiki/Ride_height

   Ride height or ground clearance is the amount of space between the base of an automobile tire and the lowest point of the automobile, typically the bottom exterior of the differential housing (even though the lower shock mounting point may be lower); or, more properly, to the shortest distance between a flat, level surface, and the lowest part ...

6. Plus sizing - Wikipedia

   en.wikipedia.org/wiki/Plus_sizing

   Plus sizing is the practice of replacing an automotive wheel with one of a larger diameter fitted with a new tire of lower aspect ratio so that the new tire has close to the same diameter and circumference as the original tire to minimize any changes in speedometer accuracy, torque and traction control, while reducing sidewall flex and (generally) increasing cornering ability.

7. Formula One tyres - Wikipedia

   en.wikipedia.org/wiki/Formula_One_tyres

   For the 1981 season the maximum diameter of the rear tyre was limited to 26.0", while the diameter of the front tyres was increased. Therefore, from 1981 until 1992, Goodyear supplied white sidewall marked Eagle tyres with the sizes of 25.0"×10.0"–13" in the front and 26.0"×15.0"–13" in the rear. [6]