Search results
Results from the WOW.Com Content Network
A chisel is a wedged hand tool with a characteristically shaped cutting edge on the end of its blade, for carving or cutting a hard material (e.g. wood, stone, or metal). The tool can be used by hand, struck with a mallet , or applied with mechanical power . [ 1 ]
A pinch point bar has a chisel at one end. Bars are typically 5 to 6 ft (1.5 to 1.8 m) long and weigh 15 to 23 lb (6.8 to 10.4 kg). They are usually made entirely of cylindrical or hexagonal forged steel with a diameter of approximately 1 in (2.5 cm). Chisel and wedge ends typically have a blade width measuring 1 to 3 in (3 to 8 cm).
Components of a simple drawn plow: 1) beam; 2) three point hitch; 3) height regulator; 4) coulter (or knife) 5) chisel 6) plowshare 7) moldboard Instrument for cleaning a plowshare used at a mill near Horažďovice, Czech Republic. In agriculture, a plowshare or ploughshare (UK; / ˈ p l aʊ ʃ ɛər /) is a component of a plow (or plough).
A narrow chisel-like blade with flat, angled cutting edge, positioned higher than the axis of the handle: For cutting stencils, scoring and etching No. 17: B3, 3, 3 Graduated, 3 Long, 5, 7, 9: A flat face 1.6 mm chisel blade: For narrow cuts No. 18: 4, 4 Graduated, 4 Long, 6: A 12.7 mm chisel blade: For deep cuts and scraping No. 19: 4, 4 ...
Mortise chisels are used for heavy chopping across the grain, are nearly always struck, and are used to square up the ends of square-ended mortises. Both tools are used for levering out chunks when first clearing out a mortise and so have similarly shaped bevels , often with a curved bevel surface for a better fulcrum action.
Besides peening (surface-hardening by impact), the ball-peen hammer is useful for many tasks, such as striking punches and chisels (usually performed with the flat face of the hammer). The peening face or ball face is useful for rounding off edges of metal pins and fasteners, such as rivets.
The corner of a chisel, knife, or gouge bevel which meets the back of the blade and polishes the cut. holdfast. Also called a hold down. A hold-down iron fitting into a hole in a bench and tightened or loosened by hammer taps. hollow grind A concave bevel on a chisel, gouge, or knife.
A stonemason's hammer, also known as a brick hammer, has one flat traditional face and a short or long chisel-shaped blade. [1] It can thus be used to chip off edges or small pieces of stone, cut brick or a concrete masonry unit, without using a separate chisel. The chisel blade can also be used to rapidly cut bricks or cinder blocks.