Search results
Results from the WOW.Com Content Network
There is no single vacuum pump that can operate all the way from atmospheric pressure to ultra-high vacuum. Instead, a series of different pumps is used, according to the appropriate pressure range for each pump. In the first stage, a roughing pump clears most of the gas from the chamber. This is followed by one or more vacuum pumps that ...
A typical chart covers a pressure range of 0.01–1000 bar, and temperatures up to 800 degrees Celsius. [3] It shows enthalpy H {\displaystyle H} in terms of internal energy U {\displaystyle U} , pressure p {\displaystyle p} and volume V {\displaystyle V} using the relationship H = U + p V {\displaystyle H=U+pV\,\!} (or, in terms of specific ...
Pressure used in boilers of steam locomotives [citation needed] 1.1 MPa 162 psi Pressure of an average human bite [citation needed] 2.8–8.3 MPa 400–1,200 psi Pressure of carbon dioxide propellant in a paintball gun [64] 5 MPa 700 psi Water pressure of the output of a coin-operated car wash spray nozzle [58] 5 MPa 700 psi
Oil and gas separators can operate at pressures ranging from a high vacuum to 4,000 to 5,000 psi. Most oil and gas separators operate in the pressure range of 20 to 1,500 psi. Separators may be referred to as low pressure, medium pressure, or high pressure. Low-pressure separators usually operate at pressures ranging from 10 to 20 up to 180 to ...
A low pressure ratio fan (such as that used on a high bypass ratio turbofan) has a range of working lines. At high flight speeds, the ram pressure ratio factors up the cold nozzle pressure ratio, causing the nozzle to choke. Above the choking condition, the working lines tend to coalesce into a unique steep straight line.
In aerodynamics, the normal shock tables are a series of tabulated data listing the various properties before and after the occurrence of a normal shock wave. [1] With a given upstream Mach number , the post-shock Mach number can be calculated along with the pressure , density , temperature , and stagnation pressure ratios.
Since 1982, STP has been defined as a temperature of 273.15 K (0 °C, 32 °F) and an absolute pressure of exactly 1 bar (100 kPa, 10 5 Pa). NIST uses a temperature of 20 °C (293.15 K, 68 °F) and an absolute pressure of 1 atm (14.696 psi, 101.325 kPa). [3] This standard is also called normal temperature and pressure (abbreviated as NTP).
The term "roughing pump" derives from the vacuum range it works in, "rough vacuum", above 1x10 −3 torr (0.1 Pa). Pumps that operate in the high vacuum ranges typically don't operate, or only operate inefficiently, at atmospheric pressures , whereas pumps that work efficiently at atmospheric pressure usually cannot produce a vacuum lower than ...