enow.com Web Search

  1. Ads

    related to: 1 2 plywood in mm width

Search results

  1. Results from the WOW.Com Content Network
  2. BS 1088 - Wikipedia

    en.wikipedia.org/wiki/BS_1088

    Moisture Content-- BS 1088 plywood must have a moisture content between 6% and 14% when it leaves the factory. Finishing-- Boards will be sanded on both sides equally. Length & Width-- The length or width of a board produced as a standard size shall not be less than the specified size nor more than 6.3 mm (0.25") greater than the specified size.

  3. Plywood - Wikipedia

    en.wikipedia.org/wiki/Plywood

    The most commonly used thickness range is from 1 ⁄ 8 to 3 inches (3.2–76.2 mm). The sizes of the most commonly used plywood sheets are 4 by 8 feet (1,220 mm × 2,440 mm) [20] which was first used by the Portland Manufacturing Company, who developed modern veneer core plywood for the 1905 Portland World Fair. A common metric size for a sheet ...

  4. Lumber - Wikipedia

    en.wikipedia.org/wiki/Lumber

    Re-sawing is the splitting of 1-to-12-inch (25–305 mm) hardwood or softwood lumber into two or more thinner pieces of full-length boards. For example, splitting a 10-foot-long (3.0 m) 2×4 (1 + 12 by 3 + 12 in or 38 by 89 mm) into two 1×4s (3 ⁄ 4 by 3 + 12 in or 19 by 89 mm) of the same length is considered re-sawing.

  5. Board foot - Wikipedia

    en.wikipedia.org/wiki/Board_foot

    The board foot or board-foot is a unit of measurement for the volume of lumber in the United States and Canada [1]. It equals the volume of a board that is one foot (30.5 cm) in length, one foot in width, and one inch (2.54 cm) in thickness, or exactly 2.359 737 216 liters. Board foot can be abbreviated as FBM (for "foot, board measure"), BDFT ...

  6. Engineered wood - Wikipedia

    en.wikipedia.org/wiki/Engineered_wood

    For example, 9.5 mm (3 ⁄ 8 in) plywood sheathing or OSB sheathing typically has a surface density of 4.9–5.9 kg/m 2 (11.2 lb/sq ft). [51] Many other engineered woods have densities much higher than OSB.

  7. Parallel-strand lumber - Wikipedia

    en.wikipedia.org/wiki/Parallel-strand_lumber

    The beams are continuously formed, so the length of the beam is limited only to the maximum length that can be handled and transported. Typical widths are 3 + 12, 5 + 1 ⁄ 4 or 7 inches (89, 133 or 178 mm); typical depths are 9 + 12, 11 + 7 ⁄ 8, 14, 16 and 18 inches (240, 300, 360, 410 and 460 mm). Typically the beams are made to a ...

  1. Ads

    related to: 1 2 plywood in mm width