Search results
Results from the WOW.Com Content Network
Degradation of I DSS [12] by gate sinking and hydrogen poisoning. This failure is the most common and easiest to detect, and is affected by reduction of the active channel of the transistor in gate sinking and depletion of the donor density in the active channel for hydrogen poisoning. Degradation in gate leakage current. This occurs at ...
There is also a recovery concern: a diode's current will not decrease immediately when switching from forward-biased to reverse-biased, because discharging its stored charge takes a finite amount of time (t rr or reverse recovery time). [1] In a diode OR gate, if two or more of the inputs are high and one switches to low, recovery issues will ...
In electronics, a step recovery diode (SRD, snap-off diode or charge-storage diode or memory varactor [a]) is a semiconductor junction diode with the ability to generate extremely short pulses. It has a variety of uses in microwave (MHz to GHz range) electronics as pulse generator or parametric amplifier .
A diode can be formed away from a MOSFET source/drain, for example, with an n+ implant in a p-substrate or with a p+ implant in an n-well. If the diode is connected to metal near the gate(s), it can protect the gate oxide. This can be done only on nets with violations, or on every gate (in general by putting such diodes in every library cell).
A gate turn-off thyristor (GTO) is a special type of thyristor, which is a high-power (e.g. 1200 V AC) semiconductor device. It was invented by General Electric . [ 1 ] GTOs, as opposed to normal thyristors, are fully controllable switches which can be turned on and off by their gate lead.
A semiconductor diode is a device typically made from a single p–n junction.At the junction of a p-type and an n-type semiconductor, there forms a depletion region where current conduction is inhibited by the lack of mobile charge carriers.
In MOSFETs, hot electrons have sufficient energy to tunnel through the thin gate oxide to show up as gate current, or as substrate leakage current.In a MOSFET, when a gate is positive, and the switch is on, the device is designed with the intent that electrons will flow laterally through the conductive channel, from the source to the drain.
It is a PNPN diode with alternating layers of P-type and N-type material. It is equivalent to a thyristor with a disconnected gate. Shockley diodes were manufactured and marketed by Shockley Semiconductor Laboratory in the late 1950s. The Shockley diode has a negative resistance characteristic. [1] It was largely superseded by the diac.