Ad
related to: gm fuel sending unit parts manual diagram
Search results
Results from the WOW.Com Content Network
It allows a V6 or V8 engine to "turn off" half of the cylinders under light-load conditions to improve fuel economy. Estimated performance on EPA tests shows a 5.5–7.5% improvement in fuel economy. [1] GM's Active Fuel Management [2] technology used a solenoid to deactivate the lifters on selected cylinders of a pushrod V-layout engine.
It was used on all GM vehicles, at least in the North American market, from 1975 through the mid-1980s. [vague] The system is an electronic system that requires no scheduled maintenance, provides up to 35,000 volts to fire the spark plugs and increase spark plug life, especially when unleaded fuel is used. The HEI system has 40% more voltage ...
The reasons that the fuel pump is typically located in the fuel tank are: By submerging the pump in fuel at the bottom of the tank, the pump is cooled by the surrounding fuel; Liquid fuel by itself (i.e. without oxygen present) isn't flammable, therefore surrounding the fuel pump by fuel reduces the risk of fire
For the 1990 model year, GM replaced the 2.0-liter engine with a stroked version displacing 2.2 liters and using throttle-body fuel injection (TBI). Commonly called the 2.2, it produced 95 hp (71 kW) and 120 lb⋅ft (163 N⋅m) of torque. Applications: 1990–1991 Chevrolet Beretta; 1990–1991 Chevrolet Cavalier; 1990–1991 Chevrolet Corsica
The High Value engine family from General Motors is a group of cam-in-block or overhead valve V6 engines.These engines feature cast iron blocks and aluminum heads, and use the same 60° vee bank as the 60° V6 family they are based on, but the new 99 mm (3.90 in) bore required offsetting the bores by 1.5 mm (0.059 in) away from the engine center line.
An engine control unit (ECU), also called an engine control module (ECM), [1] is a device that controls various subsystems of an internal combustion engine. Systems commonly controlled by an ECU include the fuel injection and ignition systems.
The Chevrolet 90° V6 family of V6 engines began in 1978 with the Chevrolet 200 cu in (3.3 L) as the base engine for the all new 1978 Chevrolet Malibu.The original engine family was phased out in early 2014, with its final use as the 4.3 L (262 cu in) V6 engine used in Chevrolet and GMC trucks and vans.
In 1957 Chevrolet introduced their first fuel-injected engine, [12] the Rochester Ramjet high-performance option on Corvette and passenger cars at $484. [13] In 1956 Oldsmobile were also experimenting with Rochester fuel injection, at the GM desert proving grounds near Phoenix, but offered the Rochester triple-carburetor J2 option for 1957. [14]
Ad
related to: gm fuel sending unit parts manual diagram