Search results
Results from the WOW.Com Content Network
The amount of O-ring erosion was insufficient to prevent the O-ring from sealing, and investigators concluded that the soot between the O-rings resulted from non-uniform pressure at the time of ignition. [3]: 130 [6]: 39–42 The January 1985 launch of STS-51-C was the coldest Space Shuttle launch to date. The air temperature was 62 °F (17 °C ...
Full Description: On January 28, 1986, the Challenger space shuttle and her seven-member crew were lost when a ruptured O-ring in the right solid rocket booster caused an explosion soon after launch. This photograph, taken a few seconds after the accident, shows the main engines and solid rocket booster exhaust plumes entwined around a ball of ...
Bruce Weaver, a Florida-based photographer who captured a definitive image of space shuttle Challenger breaking apart into plumes of smoke and fire after liftoff, has died. Working as a freelance ...
The commission found that the immediate cause of the Challenger accident was a failure in the O-rings sealing the aft field joint on the right solid rocket booster, causing pressurized hot gases and eventually flame to "blow by" the O-ring and contact the adjacent external tank, causing structural failure. The failure of the O-rings was ...
Video from the tracking camera E-207 shot during the liftoff of Challenger (STS-51-L) which captured the SRB plume piercing the external tank. Playback speed is 50% real-time. This angle places a greater degree of emphasis on the SRB plume which set into motion the failure of the tank that would cause the loss of the shuttle and tank less than ...
During the ascent phase, 73 seconds after liftoff, the vehicle experienced a catastrophic structural failure resulting in the loss of crew and vehicle. The Rogers Commission later determined the cause of the accident to have been the failure of the primary and secondary (backup) O-ring seals on Challenger ' s right Solid Rocket Booster (SRB ...
The space agency confirmed Thursday that a 20-foot segment of the Challenger was discovered earlier this year off the Florida coast by divers who were searching for wreckage of missing World War ...
The SRB casings were made of 12.7 mm (0.50 in) thick steel and were much stronger than the orbiter and ET; thus, both SRBs survived the breakup of the Space Shuttle stack, even though the right SRB was still suffering the effects of the joint burn-through that had set the destruction of Challenger in motion. [3]